PHP Class Scalr\Service\Aws\Ec2\V20150415\Ec2Api

Implements Ec2 Low-Level API Actions.

Since: 5.0.0

Author: Vlad Dobrovolskiy ([email protected])

Inheritance: extends Scalr\Service\Aws\AbstractApi

Mostrar archivo Open project: scalr/scalr

Protected Properties

Property	Type	Description
$ec2	Scalr\Service\Aws\Ec2
$versiondate	string

Public Methods

Method	Description
__construct ( Ec2 $ec2, Scalr\Service\Aws\Client\ClientInterface $client )	Constructor
allocateAddress ( string $domain = null ) : Scalr\Service\Aws\Ec2\DataType\AddressData	AllocateAddress action
associateAddress ( Scalr\Service\Aws\Ec2\DataType\AssociateAddressRequestData $request ) : boolean \| string	AssociateAddress action
associateRouteTable ( string $routeTableId, string $subnetId ) : string	AssociateRouteTable action
attachInternetGateway ( string $internetGatewayId, string $vpcId ) : boolean	AttachInternetGateway action
attachNetworkInterface ( string $networkInterfaceId, string $instanceId, integer $deviceIndex ) : string	AttachNetworkInterface action
attachVolume ( string $volumeId, string $instanceId, string $device ) : AttachmentSetResponseData	AttachVolume action
authorizeSecurityGroupEgress ( Scalr\Service\Aws\Ec2\DataType\IpPermissionList $ipPermissions, string $groupId ) : boolean	AuthorizeSecurityGroupEgress action
authorizeSecurityGroupIngress ( Scalr\Service\Aws\Ec2\DataType\IpPermissionList $ipPermissions, string $groupId = null, string $groupName = null ) : boolean	AuthorizeSecurityGroupIngress action
copyImage ( string $srcRegion, string $srcImageId, string $name = null, string $description = null, string $clientToken = null, string $destRegion = null ) : string	CopyImage action
copySnapshot ( string $srcRegion, string $srcSnapshotId, string $description = null, string $destRegion = null, string $presignedUrl = null, boolean $encrypted = null, string $kmsKeyId = null ) : string	CopySnapshot action
createImage ( Scalr\Service\Aws\Ec2\DataType\CreateImageRequestData $request ) : string	CreateImage action
createInternetGateway ( ) : Scalr\Service\Aws\Ec2\DataType\InternetGatewayData	CreateInternetGateway action
createKeyPair ( string $keyName ) : Scalr\Service\Aws\Ec2\DataType\KeyPairData	CreateKeyPair action
createNetworkInterface ( Scalr\Service\Aws\Ec2\DataType\CreateNetworkInterfaceRequestData $request ) : Scalr\Service\Aws\Ec2\DataType\NetworkInterfaceData	CreateNetworkInterface action
createPlacementGroup ( string $groupName, string $strategy = 'cluster' ) : boolean	CreatePlacementGroup action
createRoute ( string $routeTableId, string $destinationCidrBlock, string $gatewayId = null, string $instanceId = null, string $networkInterfaceId = null, string $vpcPeeringConnectionId = null, string $clientToken = null ) : boolean	CreateRoute action
createRouteTable ( string $vpcId ) : Scalr\Service\Aws\Ec2\DataType\RouteTableData	CreateRouteTable action
createSecurityGroup ( string $groupName, string $groupDescription, string $vpcId = null ) : string	CreateSecurityGroup action
createSnapshot ( string $volumeId, string $description = null ) : SnapshotData	CreateSnapshot action
createSubnet ( string $vpcId, string $cidrBlock, string $availabilityZone = null ) : Scalr\Service\Aws\Ec2\DataType\SubnetData	CreateSubnet action
createTags ( ListDataType $resourceIdList, Scalr\Service\Aws\Ec2\DataType\ResourceTagSetList $tagList ) : boolean	CreateTags action
createVolume ( CreateVolumeRequestData $request ) : VolumeData	CreateVolume action
createVpc ( string $cidrBlock, string $instanceTenancy = null ) : Scalr\Service\Aws\Ec2\DataType\VpcData	CreateVpc action
deleteInternetGateway ( string $internetGatewayId ) : boolean	DeleteInternetGateway action
deleteKeyPair ( string $keyName ) : boolean	DeleteKeyPair action
deleteNetworkInterface ( string $networkInterfaceId ) : boolean	DeleteNetworkInterface action
deletePlacementGroup ( string $groupName ) : boolean	DeletePlacementGroup action
deleteRoute ( string $routeTableId, string $destinationCidrBlock ) : boolean	DeleteRoute action
deleteRouteTable ( string $routeTableId ) : boolean	DeleteRouteTable action
deleteSecurityGroup ( string $groupId = null, string $groupName = null ) : boolean	DeleteSecurityGroup action
deleteSnapshot ( string $snapshotId ) : boolean	DeleteSnapshot action
deleteSubnet ( string $subnetId ) : boolean	DeleteSubnet action
deleteTags ( ListDataType $resourceIdList, Scalr\Service\Aws\Ec2\DataType\ResourceTagSetList $tagList ) : boolean	DeleteTags action
deleteVolume ( string $volumeId ) : boolean	DeleteVolume action
deleteVpc ( string $vpcId ) : boolean	DeleteVpc action
deregisterImage ( string $imageId ) : boolean	DeregisterImage action
describeAccountAttributes ( ListDataType $attributeName ) : Scalr\Service\Aws\Ec2\DataType\AccountAttributeSetList	DescribeAccountAttributes
describeAddresses ( ListDataType $publicIpList = null, ListDataType $allocationIdList = null, Scalr\Service\Aws\Ec2\DataType\AddressFilterList $filter = null ) : Scalr\Service\Aws\Ec2\DataType\AddressList	DescribeAddresses action
describeAvailabilityZones ( ListDataType $zoneName = null, Scalr\Service\Aws\Ec2\DataType\AvailabilityZoneFilterList $filter = null ) : Scalr\Service\Aws\Ec2\DataType\AvailabilityZoneList	DescribeAvailabilityZones action
describeImages ( ListDataType $imageIdList = null, ListDataType $ownerList = null, Scalr\Service\Aws\Ec2\DataType\ImageFilterList $filter = null, ListDataType $executableByList = null ) : Scalr\Service\Aws\Ec2\DataType\ImageList	DescribeImages action
describeInstanceAttribute ( string $instanceId, Scalr\Service\Aws\Ec2\DataType\InstanceAttributeType $attribute ) : mixed	DescribeInstanceAttribute action
describeInstanceStatus ( ListDataType $instanceIdList = null, boolean $includeAllInstances = null, Scalr\Service\Aws\Ec2\DataType\InstanceStatusFilterList $filter = null, string $nextToken = null, integer $maxResults = null ) : Scalr\Service\Aws\Ec2\DataType\InstanceStatusList	DescribeInstanceStatus action
describeInstances ( ListDataType $instanceIdList = null, Scalr\Service\Aws\Ec2\DataType\InstanceFilterList $filter = null, string $nextToken = null, integer $maxResults = null ) : Scalr\Service\Aws\Ec2\DataType\ReservationList	DescribeInstances action
describeInternetGateways ( ListDataType $internetGatewayIdList = null, Scalr\Service\Aws\Ec2\DataType\InternetGatewayFilterList $filter = null ) : Scalr\Service\Aws\Ec2\DataType\InternetGatewayList	DescribeInternetGateways
describeKeyPairs ( ListDataType $keyNameList = null, array $filter = null ) : Scalr\Service\Aws\Ec2\DataType\KeyPairList	DescribeKeyPairs action
describeNetworkInterfaceAttribute ( string $networkInterfaceId, Scalr\Service\Aws\Ec2\DataType\NetworkInterfaceAttributeType $attribute ) : mixed	DescribeNetworkInterfaceAttribute action
describeNetworkInterfaces ( ListDataType $networkInterfaceIdList = null, Scalr\Service\Aws\Ec2\DataType\NetworkInterfaceFilterList $filter = null ) : Scalr\Service\Aws\Ec2\DataType\NetworkInterfaceList	DescribeNetworkInterfaces action
describePlacementGroups ( ListDataType $groupNameList = null, Scalr\Service\Aws\Ec2\DataType\PlacementGroupFilterList $filter = null ) : Scalr\Service\Aws\Ec2\DataType\PlacementGroupList	DescribePlacementGroups action
describeRegions ( ) : Scalr\Service\Aws\Ec2\DataType\RegionInfoList	DescribeRegions action
describeReservedInstances ( ListDataType $reservedInstanceIdList = null, Scalr\Service\Aws\Ec2\DataType\ReservedInstanceFilterList $filter = null, Scalr\Service\Aws\Ec2\DataType\OfferingType $offeringType = null ) : Scalr\Service\Aws\Ec2\DataType\ReservedInstanceList	DescribeReservedInstances action
describeRouteTables ( ListDataType $routeTableIdList = null, Scalr\Service\Aws\Ec2\DataType\RouteTableFilterList $filter = null ) : Scalr\Service\Aws\Ec2\DataType\RouteTableList	DescribeRouteTables action
describeSecurityGroups ( ListDataType $groupName = null, ListDataType $groupId = null, Scalr\Service\Aws\Ec2\DataType\SecurityGroupFilterList $filter = null ) : Scalr\Service\Aws\Ec2\DataType\SecurityGroupList	DescribeSecurityGroups action
describeSnapshots ( ListDataType $snapshotIdList = null, ListDataType $ownerList = null, Scalr\Service\Aws\Ec2\DataType\SnapshotFilterList $filter = null, ListDataType $restorableByList = null, string $nextToken = null, integer $maxResults = null ) : Scalr\Service\Aws\Ec2\DataType\SnapshotList	DescribeSnapshots action
describeSubnets ( ListDataType $subnetIdList = null, Scalr\Service\Aws\Ec2\DataType\SubnetFilterList $filter = null ) : Scalr\Service\Aws\Ec2\DataType\SubnetList	DescribeSubnets action
describeVolumes ( ListDataType $volumeIdList = null, Scalr\Service\Aws\Ec2\DataType\VolumeFilterList $filter = null, string $nextToken = null, integer $maxResults = null ) : Scalr\Service\Aws\Ec2\DataType\VolumeList	DescribeVolumes action
describeVpcs ( ListDataType $vpcIdList = null, Scalr\Service\Aws\Ec2\DataType\VpcFilterList $filter = null ) : Scalr\Service\Aws\Ec2\DataType\VpcList	DescribeVpcs action
detachInternetGateway ( string $internetGatewayId, string $vpcId ) : boolean	DetachInternetGateway action
detachNetworkInterface ( string $attachmentId, boolean $force = null ) : boolean	DetachNetworkInterface
detachVolume ( string $volumeId, string $instanceId = null, string $device = null, boolean $force = null ) : AttachmentSetResponseData	DetachVolume action
disassociateAddress ( string $publicIp = null, string $associationId = null ) : boolean	DisassociateAddress action
disassociateRouteTable ( string $associationId ) : boolean	DisassociateRouteTable action
getConsoleOutput ( string $instanceId ) : GetConsoleOutputResponseData	GetConsoleOutput action
getEntityManager ( ) : Scalr\Service\Aws\EntityManager	Gets an entity manager
getInstanceIdListQuery ( ListDataType $instanceIdList, string $name = 'InstanceId' ) : array	Type cast the list of the InstanceId into accepted state.
getPasswordData ( string $instanceId ) : GetPasswordDataResponseData	GetPasswordData action
modifyInstanceAttribute ( string $instanceId, Scalr\Service\Aws\Ec2\DataType\InstanceAttributeType $attribute, mixed $value ) : boolean	ModifyInstanceAttribute action
modifyNetworkInterfaceAttribute ( string $networkInterfaceId, Scalr\Service\Aws\Ec2\DataType\NetworkInterfaceAttributeType $attr, mixed $value ) : boolean	ModifyNetworkInterfaceAttribute action
monitorInstances ( ListDataType $instanceIdList ) : Scalr\Service\Aws\Ec2\DataType\MonitorInstancesResponseSetList	MonitorInstances action
rebootInstances ( ListDataType $instanceIdList ) : boolean	RebootInstances action
registerImage ( Scalr\Service\Aws\Ec2\DataType\RegisterImageData $request ) : string	RegisterImage action
releaseAddress ( string $publicIp = null, string $allocationId = null ) : boolean	ReleaseAddress action
replaceRoute ( string $routeTableId, string $destinationCidrBlock, string $gatewayId = null, string $instanceId = null, string $networkInterfaceId = null, string $vpcPeeringConnectionId = null ) : boolean	ReplaceRoute action
replaceRouteTableAssociation ( string $routeTableId, string $associationId ) : string	ReplaceRouteTableAssociation action
resetNetworkInterfaceAttribute ( string $networkInterfaceId, Scalr\Service\Aws\Ec2\DataType\NetworkInterfaceAttributeType $attr ) : boolean	ResetNetworkInterfaceAttribute action
revokeSecurityGroupEgress ( Scalr\Service\Aws\Ec2\DataType\IpPermissionList $ipPermissions, string $groupId ) : boolean	RevokeSecurityGroupEgress action
revokeSecurityGroupIngress ( Scalr\Service\Aws\Ec2\DataType\IpPermissionList $ipPermissions, string $groupId = null, string $groupName = null ) : boolean	RevokeSecurityGroupIngress action
runInstances ( Scalr\Service\Aws\Ec2\DataType\RunInstancesRequestData $request ) : Scalr\Service\Aws\Ec2\DataType\ReservationData	RunInstances action
startInstances ( ListDataType $instanceIdList ) : Scalr\Service\Aws\Ec2\DataType\InstanceStateChangeList	StartInstances action
stopInstances ( ListDataType $instanceIdList, boolean $force = null ) : Scalr\Service\Aws\Ec2\DataType\InstanceStateChangeList	StopInstances action
terminateInstances ( ListDataType $instanceIdList ) : Scalr\Service\Aws\Ec2\DataType\InstanceStateChangeList	TerminateInstances
unmonitorInstances ( ListDataType $instanceIdList ) : Scalr\Service\Aws\Ec2\DataType\MonitorInstancesResponseSetList	UnmonitorInstances action

Protected Methods

Method	Description
_loadAttachmentSetResponseList ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\AttachmentSetResponseList	Loads AttachmentSetResponseList from simple xml object
_loadBlockDeviceMappingList ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\BlockDeviceMappingList	Loads BlockDeviceMappingList from simple xml object
_loadEbsBlockDeviceData ( SimpleXMLElement $sxml ) : EbsBlockDeviceData	Loads EbsBlockDeviceData from simple xml object
_loadEbsInstanceBlockDeviceMappingResponseData ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\EbsInstanceBlockDeviceMappingResponseData	Loads EbsInstanceBlockDeviceMappingResponseData from simple xml object
_loadGroupList ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\GroupList	Loads GroupList from simple xml object
_loadIamInstanceProfileResponseData ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\IamInstanceProfileResponseData	Loads IamInstanceProfileResponseData from simple xml object
_loadInstanceBlockDeviceMappingResponseList ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\InstanceBlockDeviceMappingResponseList	Loads InstanceBlockDeviceMappingResponseList from simple xml object
_loadInstanceList ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\InstanceList	Loads InstanceList from simple xml object
_loadInstanceMonitoringStateData ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\InstanceMonitoringStateData	Loads InstanceMonitoringStateData from simple xml object
_loadInstanceNetworkInterfaceAssociationData ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\InstanceNetworkInterfaceAssociationData	Loads InstanceNetworkInterfaceAssociationData from simple xml object
_loadInstanceNetworkInterfaceAttachmentData ( SimpleXMLElement $sxml ) : InstanceNetworkInterfaceAttachmentData	Loads InstanceNetworkInterfaceAttachmentData from simple xml object
_loadInstanceNetworkInterfaceSetData ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\InstanceNetworkInterfaceSetData	Loads InstanceNetworkInterfaceSetData from simple xml object
_loadInstanceNetworkInterfaceSetList ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\InstanceNetworkInterfaceSetList	Loads InstanceNetworkInterfaceSetList from simple xml object
_loadInstancePrivateIpAddressesSetList ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\InstancePrivateIpAddressesSetList	Loads InstancePrivateIpAddressesSetList from simple xml object
_loadInstanceStateChangeData ( SimpleXMLElement $v ) : Scalr\Service\Aws\Ec2\DataType\InstanceStateChangeData	Loads InstanceStateChangeData from simple xml object
_loadInstanceStateData ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\InstanceStateData	Loads InstanceStateData from simple xml object
_loadInstanceStatusDetailsSetList ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\InstanceStatusDetailsSetList	Loads InstanceStatusDetailsSetList from simple xml object
_loadInstanceStatusEventTypeData ( SimpleXMLElement $sxml ) : InstanceStatusEventTypeData	Loads InstanceStatusEventTypeData from simple xml object
_loadInstanceStatusTypeData ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\InstanceStatusTypeData	Loads InstanceStatusTypeData from simple xml object
_loadInternetGatewayAttachmentData ( SimpleXMLElement $v ) : Scalr\Service\Aws\Ec2\DataType\InternetGatewayAttachmentData	Loads InternetGatewayAttachmentData from simple xml object
_loadInternetGatewayAttachmentList ( SimpleXMLElement $sxml, string $internetGatewayId = null ) : Scalr\Service\Aws\Ec2\DataType\InternetGatewayAttachmentList	Loads InternetGatewayAttachmentList from simple xml object
_loadInternetGatewayData ( SimpleXMLElement $v ) : Scalr\Service\Aws\Ec2\DataType\InternetGatewayData	Loads InternetGatewayData from simple xml object
_loadIpPermissionList ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\IpPermissionList	Loads IpPermissionList from simple xml object
_loadIpRangeList ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\IpRangeList	Loads IpRangeList from simple xml object
_loadListByName ( string $name, SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\Ec2ListDataType	Loads lists from simple xml object
_loadMonitorInstancesResponseSetData ( SimpleXMLElement $v ) : Scalr\Service\Aws\Ec2\DataType\MonitorInstancesResponseSetData	Loads MonitorInstancesResponseSetData from simple xml object
_loadNetworkInterfaceAssociationData ( SimpleXMLElement $v ) : Scalr\Service\Aws\Ec2\DataType\NetworkInterfaceAssociationData	Loads NetworkInterfaceAssociationData from simple xml object
_loadNetworkInterfaceAttachmentData ( SimpleXMLElement $v ) : NetworkInterfaceAttachmentData	Loads NetworkInterfaceAttachmentData from simple xml object
_loadNetworkInterfaceData ( SimpleXMLElement $v ) : Scalr\Service\Aws\Ec2\DataType\NetworkInterfaceData	Loads NetworkInterfaceData from simple xml object
_loadNetworkInterfacePrivateIpAddressesSetData ( SimpleXMLElement $v ) : Scalr\Service\Aws\Ec2\DataType\NetworkInterfacePrivateIpAddressesSetData	Loads NetworkInterfacePrivateIpAddressesSetData from simple xml object
_loadPlacementGroupData ( SimpleXMLElement $v ) : Scalr\Service\Aws\Ec2\DataType\PlacementGroupData	Loads PlacementGroupData from simple xml object
_loadPlacementResponseData ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\PlacementResponseData	Loads PlacementResponseData from simple xml object
_loadProductCodeSetList ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\ProductCodeSetList	Loads ProductCodeSetList from simple xml object
_loadPropagatingVgwData ( SimpleXMLElement $v ) : Scalr\Service\Aws\Ec2\DataType\PropagatingVgwData	Loads PropagatingVgwData from simple xml object
_loadRecurringChargesSetList ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\RecurringChargesSetList	Loads RecurringChargesSetList from simple xml object
_loadResourceTagSetList ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\ResourceTagSetList	Loads ResourceTagSetList from simple xml object
_loadRouteData ( SimpleXMLElement $v ) : Scalr\Service\Aws\Ec2\DataType\RouteData	Loads RouteData from simple xml object
_loadRouteList ( SimpleXMLElement $sxml, string $routeTableId = null ) : Scalr\Service\Aws\Ec2\DataType\RouteList	Loads RouteList from simple xml object
_loadRouteTableAssociationData ( SimpleXMLElement $v ) : Scalr\Service\Aws\Ec2\DataType\RouteTableAssociationData	Loads RouteTableAssociationData from simple xml object
_loadRouteTableData ( SimpleXMLElement $v ) : Scalr\Service\Aws\Ec2\DataType\RouteTableData	Loads RouteTableData from simple xml object
_loadSnapshotData ( SimpleXMLElement $v ) : SnapshotData	Loads SnapshotData from simple xml object
_loadStateReasonData ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\StateReasonData	Loads StateReasonData from simple xml object
_loadSubnetData ( SimpleXMLElement $v ) : Scalr\Service\Aws\Ec2\DataType\SubnetData	Loads SubnetData from simple xml object
_loadUserIdGroupPairList ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\UserIdGroupPairList	Loads UserIdGroupPairList from simple xml object
_loadVolumeData ( SimpleXMLElement $v ) : VolumeData	Loads VolumeData from simple xml object
_loadVpcData ( SimpleXMLElement $v ) : Scalr\Service\Aws\Ec2\DataType\VpcData	Loads VpcData from simple xml object

Method Details

__construct() public method

Constructor

public __construct ( Ec2 $ec2, Scalr\Service\Aws\Client\ClientInterface $client )
$ec2	Scalr\Service\Aws\Ec2	Ec2 instance
$client	Scalr\Service\Aws\Client\ClientInterface	Client Interface

_loadAttachmentSetResponseList() protected method

Loads AttachmentSetResponseList from simple xml object

protected _loadAttachmentSetResponseList ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\AttachmentSetResponseList
$sxml	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\AttachmentSetResponseList	Returns AttachmentSetResponseList

_loadBlockDeviceMappingList() protected method

Loads BlockDeviceMappingList from simple xml object

protected _loadBlockDeviceMappingList ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\BlockDeviceMappingList
$sxml	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\BlockDeviceMappingList	Returns BlockDeviceMappingList

_loadEbsBlockDeviceData() protected method

Loads EbsBlockDeviceData from simple xml object

protected _loadEbsBlockDeviceData ( SimpleXMLElement $sxml ) : EbsBlockDeviceData
$sxml	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\EbsBlockDeviceData	Returns EbsBlockDeviceData

_loadEbsInstanceBlockDeviceMappingResponseData() protected method

Loads EbsInstanceBlockDeviceMappingResponseData from simple xml object

protected _loadEbsInstanceBlockDeviceMappingResponseData ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\EbsInstanceBlockDeviceMappingResponseData
$sxml	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\EbsInstanceBlockDeviceMappingResponseData	Returns EbsInstanceBlockDeviceMappingResponseData

_loadGroupList() protected method

Loads GroupList from simple xml object

protected _loadGroupList ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\GroupList
$sxml	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\GroupList	Returns GroupList

_loadIamInstanceProfileResponseData() protected method

Loads IamInstanceProfileResponseData from simple xml object

protected _loadIamInstanceProfileResponseData ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\IamInstanceProfileResponseData
$sxml	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\IamInstanceProfileResponseData	Returns IamInstanceProfileResponseData

_loadInstanceBlockDeviceMappingResponseList() protected method

Loads InstanceBlockDeviceMappingResponseList from simple xml object

protected _loadInstanceBlockDeviceMappingResponseList ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\InstanceBlockDeviceMappingResponseList
$sxml	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\InstanceBlockDeviceMappingResponseList	Returns InstanceBlockDeviceMappingResponseList

_loadInstanceList() protected method

Loads InstanceList from simple xml object

protected _loadInstanceList ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\InstanceList
$sxml	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\InstanceList	Returns InstanceList

_loadInstanceMonitoringStateData() protected method

Loads InstanceMonitoringStateData from simple xml object

protected _loadInstanceMonitoringStateData ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\InstanceMonitoringStateData
$sxml	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\InstanceMonitoringStateData	Returns InstanceMonitoringStateData

_loadInstanceNetworkInterfaceAssociationData() protected method

Loads InstanceNetworkInterfaceAssociationData from simple xml object

protected _loadInstanceNetworkInterfaceAssociationData ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\InstanceNetworkInterfaceAssociationData
$sxml	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\InstanceNetworkInterfaceAssociationData	Returns InstanceNetworkInterfaceAssociationData

_loadInstanceNetworkInterfaceAttachmentData() protected method

Loads InstanceNetworkInterfaceAttachmentData from simple xml object

protected _loadInstanceNetworkInterfaceAttachmentData ( SimpleXMLElement $sxml ) : InstanceNetworkInterfaceAttachmentData
$sxml	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\InstanceNetworkInterfaceAttachmentData	Returns InstanceNetworkInterfaceAttachmentData

_loadInstanceNetworkInterfaceSetData() protected method

Loads InstanceNetworkInterfaceSetData from simple xml object

protected _loadInstanceNetworkInterfaceSetData ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\InstanceNetworkInterfaceSetData
$sxml	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\InstanceNetworkInterfaceSetData	Returns InstanceNetworkInterfaceSetData

_loadInstanceNetworkInterfaceSetList() protected method

Loads InstanceNetworkInterfaceSetList from simple xml object

protected _loadInstanceNetworkInterfaceSetList ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\InstanceNetworkInterfaceSetList
$sxml	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\InstanceNetworkInterfaceSetList	Returns InstanceNetworkInterfaceSetList

_loadInstancePrivateIpAddressesSetList() protected method

Loads InstancePrivateIpAddressesSetList from simple xml object

protected _loadInstancePrivateIpAddressesSetList ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\InstancePrivateIpAddressesSetList
$sxml	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\InstancePrivateIpAddressesSetList	Returns InstancePrivateIpAddressesSetList

_loadInstanceStateChangeData() protected method

Loads InstanceStateChangeData from simple xml object

protected _loadInstanceStateChangeData ( SimpleXMLElement $v ) : Scalr\Service\Aws\Ec2\DataType\InstanceStateChangeData
$v	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\InstanceStateChangeData	Returns InstanceStateChangeData

_loadInstanceStateData() protected method

Loads InstanceStateData from simple xml object

protected _loadInstanceStateData ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\InstanceStateData
$sxml	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\InstanceStateData	Returns InstanceStateData

_loadInstanceStatusDetailsSetList() protected method

Loads InstanceStatusDetailsSetList from simple xml object

protected _loadInstanceStatusDetailsSetList ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\InstanceStatusDetailsSetList
$sxml	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\InstanceStatusDetailsSetList	Returns InstanceStatusDetailsSetList

_loadInstanceStatusEventTypeData() protected method

Loads InstanceStatusEventTypeData from simple xml object

protected _loadInstanceStatusEventTypeData ( SimpleXMLElement $sxml ) : InstanceStatusEventTypeData
$sxml	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\InstanceStatusEventTypeData	Returns InstanceStatusEventTypeData

_loadInstanceStatusTypeData() protected method

Loads InstanceStatusTypeData from simple xml object

protected _loadInstanceStatusTypeData ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\InstanceStatusTypeData
$sxml	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\InstanceStatusTypeData	Returns InstanceStatusTypeData

_loadInternetGatewayAttachmentData() protected method

Loads InternetGatewayAttachmentData from simple xml object

protected _loadInternetGatewayAttachmentData ( SimpleXMLElement $v ) : Scalr\Service\Aws\Ec2\DataType\InternetGatewayAttachmentData
$v	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\InternetGatewayAttachmentData	Returns InternetGatewayAttachmentData

_loadInternetGatewayAttachmentList() protected method

Loads InternetGatewayAttachmentList from simple xml object

protected _loadInternetGatewayAttachmentList ( SimpleXMLElement $sxml, string $internetGatewayId = null ) : Scalr\Service\Aws\Ec2\DataType\InternetGatewayAttachmentList
$sxml	SimpleXMLElement
$internetGatewayId	string	The ID of the Internet Gateway
return	Scalr\Service\Aws\Ec2\DataType\InternetGatewayAttachmentList	Returns InternetGatewayAttachmentList

_loadInternetGatewayData() protected method

Loads InternetGatewayData from simple xml object

protected _loadInternetGatewayData ( SimpleXMLElement $v ) : Scalr\Service\Aws\Ec2\DataType\InternetGatewayData
$v	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\InternetGatewayData	Returns InternetGatewayData

_loadIpPermissionList() protected method

Loads IpPermissionList from simple xml object

protected _loadIpPermissionList ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\IpPermissionList
$sxml	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\IpPermissionList	Returns IpPermissionList

_loadIpRangeList() protected method

Loads IpRangeList from simple xml object

protected _loadIpRangeList ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\IpRangeList
$sxml	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\IpRangeList	Returns IpRangeList

_loadListByName() protected method

Loads lists from simple xml object

protected _loadListByName ( string $name, SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\Ec2ListDataType
$name	string	The name of the ListDataType extended object without suffix "List"
$sxml	SimpleXMLElement	The simplexmlelement object
return	Scalr\Service\Aws\Ec2\Ec2ListDataType	Returns loaded object

_loadMonitorInstancesResponseSetData() protected method

Loads MonitorInstancesResponseSetData from simple xml object

protected _loadMonitorInstancesResponseSetData ( SimpleXMLElement $v ) : Scalr\Service\Aws\Ec2\DataType\MonitorInstancesResponseSetData
$v	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\MonitorInstancesResponseSetData	Returns MonitorInstancesResponseSetData

_loadNetworkInterfaceAssociationData() protected method

Loads NetworkInterfaceAssociationData from simple xml object

protected _loadNetworkInterfaceAssociationData ( SimpleXMLElement $v ) : Scalr\Service\Aws\Ec2\DataType\NetworkInterfaceAssociationData
$v	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\NetworkInterfaceAssociationData	Returns NetworkInterfaceAssociationData

_loadNetworkInterfaceAttachmentData() protected method

Loads NetworkInterfaceAttachmentData from simple xml object

protected _loadNetworkInterfaceAttachmentData ( SimpleXMLElement $v ) : NetworkInterfaceAttachmentData
$v	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\NetworkInterfaceAttachmentData	Returns NetworkInterfaceAttachmentData

_loadNetworkInterfaceData() protected method

Loads NetworkInterfaceData from simple xml object

protected _loadNetworkInterfaceData ( SimpleXMLElement $v ) : Scalr\Service\Aws\Ec2\DataType\NetworkInterfaceData
$v	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\NetworkInterfaceData	Returns NetworkInterfaceData

_loadNetworkInterfacePrivateIpAddressesSetData() protected method

Loads NetworkInterfacePrivateIpAddressesSetData from simple xml object

protected _loadNetworkInterfacePrivateIpAddressesSetData ( SimpleXMLElement $v ) : Scalr\Service\Aws\Ec2\DataType\NetworkInterfacePrivateIpAddressesSetData
$v	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\NetworkInterfacePrivateIpAddressesSetData	Returns NetworkInterfacePrivateIpAddressesSetData

_loadPlacementGroupData() protected method

Loads PlacementGroupData from simple xml object

protected _loadPlacementGroupData ( SimpleXMLElement $v ) : Scalr\Service\Aws\Ec2\DataType\PlacementGroupData
$v	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\PlacementGroupData	Returns PlacementGroupData

_loadPlacementResponseData() protected method

Loads PlacementResponseData from simple xml object

protected _loadPlacementResponseData ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\PlacementResponseData
$sxml	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\PlacementResponseData	Returns PlacementResponseData

_loadProductCodeSetList() protected method

Loads ProductCodeSetList from simple xml object

protected _loadProductCodeSetList ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\ProductCodeSetList
$sxml	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\ProductCodeSetList	Returns ProductCodeSetList

_loadPropagatingVgwData() protected method

Loads PropagatingVgwData from simple xml object

protected _loadPropagatingVgwData ( SimpleXMLElement $v ) : Scalr\Service\Aws\Ec2\DataType\PropagatingVgwData
$v	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\PropagatingVgwData	Returns PropagatingVgwData

_loadRecurringChargesSetList() protected method

Loads RecurringChargesSetList from simple xml object

protected _loadRecurringChargesSetList ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\RecurringChargesSetList
$sxml	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\RecurringChargesSetList	Returns RecurringChargesSetList

_loadResourceTagSetList() protected method

Loads ResourceTagSetList from simple xml object

protected _loadResourceTagSetList ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\ResourceTagSetList
$sxml	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\ResourceTagSetList	Returns ResourceTagSetList

_loadRouteData() protected method

Loads RouteData from simple xml object

protected _loadRouteData ( SimpleXMLElement $v ) : Scalr\Service\Aws\Ec2\DataType\RouteData
$v	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\RouteData	Returns RouteData

_loadRouteList() protected method

Loads RouteList from simple xml object

protected _loadRouteList ( SimpleXMLElement $sxml, string $routeTableId = null ) : Scalr\Service\Aws\Ec2\DataType\RouteList
$sxml	SimpleXMLElement
$routeTableId	string	optional The ID of the Route table
return	Scalr\Service\Aws\Ec2\DataType\RouteList	Returns RouteList

_loadRouteTableAssociationData() protected method

Loads RouteTableAssociationData from simple xml object

protected _loadRouteTableAssociationData ( SimpleXMLElement $v ) : Scalr\Service\Aws\Ec2\DataType\RouteTableAssociationData
$v	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\RouteTableAssociationData	Returns RouteTableAssociationData

_loadRouteTableData() protected method

Loads RouteTableData from simple xml object

protected _loadRouteTableData ( SimpleXMLElement $v ) : Scalr\Service\Aws\Ec2\DataType\RouteTableData
$v	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\RouteTableData	Returns RouteTableData

_loadSnapshotData() protected method

Loads SnapshotData from simple xml object

protected _loadSnapshotData ( SimpleXMLElement $v ) : SnapshotData
$v	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\SnapshotData	Returns SnapshotData

_loadStateReasonData() protected method

Loads StateReasonData from simple xml object

protected _loadStateReasonData ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\StateReasonData
$sxml	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\StateReasonData	Returns StateReasonData

_loadSubnetData() protected method

Loads SubnetData from simple xml object

protected _loadSubnetData ( SimpleXMLElement $v ) : Scalr\Service\Aws\Ec2\DataType\SubnetData
$v	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\SubnetData	Returns SubnetData

_loadUserIdGroupPairList() protected method

Loads UserIdGroupPairList from simple xml object

protected _loadUserIdGroupPairList ( SimpleXMLElement $sxml ) : Scalr\Service\Aws\Ec2\DataType\UserIdGroupPairList
$sxml	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\UserIdGroupPairList	Returns UserIdGroupPairList

_loadVolumeData() protected method

Loads VolumeData from simple xml object

protected _loadVolumeData ( SimpleXMLElement $v ) : VolumeData
$v	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\VolumeData	Returns VolumeData

_loadVpcData() protected method

Loads VpcData from simple xml object

protected _loadVpcData ( SimpleXMLElement $v ) : Scalr\Service\Aws\Ec2\DataType\VpcData
$v	SimpleXMLElement
return	Scalr\Service\Aws\Ec2\DataType\VpcData	Returns VpcData

allocateAddress() public method

Acquires an Elastic IP address for use with your instances.

public allocateAddress ( string $domain = null ) : Scalr\Service\Aws\Ec2\DataType\AddressData
$domain	string	optional Set to vpc to allocate the address for use with instances in a VPC. Valid values: vpc. Condition: Required when allocating an address for use with instances in a VPC
return	Scalr\Service\Aws\Ec2\DataType\AddressData	Returns AddressData on success

associateAddress() public method

Associates an Elastic IP address with an instance. This action applies to both EC2 and VPC Elastic IP addresses. EC2: If the IP address is currently assigned to another instance, the IP address is assigned to the new instance. VPC: If the IP address is currently assigned to another instance, Amazon EC2 returns an error unless you specify the AllowReassociation parameter This is an idempotent operation. If you enter it more than once, Amazon EC2 does not return an error

public associateAddress ( Scalr\Service\Aws\Ec2\DataType\AssociateAddressRequestData $request ) : boolean \| string
$request	Scalr\Service\Aws\Ec2\DataType\AssociateAddressRequestData
return	boolean \| string	Returns associationId (for VPC Elastic IP addresses) or boolean TRUE (for others) on success.

associateRouteTable() public method

Associates a subnet with a route table. The subnet and route table must be in the same VPC. This association causes traffic originating from the subnet to be routed according to the routes in the route table. The action returns an association ID, which you need if you want to disassociate the route table from the subnet later. A route table can be associated with multiple subnets.

public associateRouteTable ( string $routeTableId, string $subnetId ) : string
$routeTableId	string	The ID of the Route Table.
$subnetId	string	The ID of the subnet.
return	string	Returns the ID of the association on success

attachInternetGateway() public method

Attaches an Internet gateway to a VPC, enabling connectivity between the Internet and the VPC

public attachInternetGateway ( string $internetGatewayId, string $vpcId ) : boolean
$internetGatewayId	string	The ID of the internet gateway
$vpcId	string	The ID of the VPC
return	boolean	Returns TRUE on success

attachNetworkInterface() public method

Attaches a network interface to an instance.

public attachNetworkInterface ( string $networkInterfaceId, string $instanceId, integer $deviceIndex ) : string
$networkInterfaceId	string	The ID of the network interface
$instanceId	string	The ID of the instance to attach to the network interface
$deviceIndex	integer	The index of the device for the network interface attachment.
return	string	Returns Attachment ID on success or throws an exception

attachVolume() public method

Attaches an Amazon EBS volume to a running instance and exposes it to the instance with the specified device name. For a list of supported device names, see Attaching the Volume to an Instance. Any device names that aren't reserved for instance store volumes can be used for Amazon EBS volumes. Note! If a volume has an AWS Marketplace product code: -The volume can only be attached to the root device of a stopped instance. -You must be subscribed to the AWS Marketplace code that is on the volume. -The configuration (instance type, operating system) of the instance must support that specific AWS Marketplace code. For example, you cannot take a volume from a Windows instance and attach it to a Linux instance. -AWS Marketplace product codes are copied from the volume to the instance.

public attachVolume ( string $volumeId, string $instanceId, string $device ) : AttachmentSetResponseData
$volumeId	string	The ID of the Amazon EBS volume. The volume and instance must be within the same Availability Zone
$instanceId	string	The ID of the Instance. The instance must be running.
$device	string	The device name as exposed to the instance
return	Scalr\Service\Aws\Ec2\DataType\AttachmentSetResponseData	Returns AttachmentSetResponseData on success

authorizeSecurityGroupEgress() public method

Adds one or more egress rules to a security group for use with a VPC. Specifically, this action permits instances to send traffic to one or more destination CIDR IP address ranges, or to one or more destination security groups for the same VPC. Important! You can have up to 50 rules per group (covering both ingress and egress rules). A security group is for use with instances either in the EC2-Classic platform or in a specific VPC. This action doesn't apply to security groups for EC2-Classic. Each rule consists of the protocol (for example, TCP), plus either a CIDR range or a source group. For the TCP and UDP protocols, you must also specify the destination port or port range. For the ICMP protocol, you must also specify the ICMP type and code. You can use -1 for the type or code to mean all types or all codes. Rule changes are propagated to affected instances as quickly as possible. However, a small delay might occur.

public authorizeSecurityGroupEgress ( Scalr\Service\Aws\Ec2\DataType\IpPermissionList $ipPermissions, string $groupId ) : boolean
$ipPermissions	Scalr\Service\Aws\Ec2\DataType\IpPermissionList	Ip permission list object
$groupId	string	optional The ID of the security group to modify.
return	boolean	Returns true on success

authorizeSecurityGroupIngress() public method

Adds one or more ingress rules to a security group. This action applies to both EC2 security groups and VPC security groups. For EC2 security groups, this action gives one or more CIDR IP address ranges permission to access a security group in your account, or gives one or more security groups (called the source groups) permission to access a security group in your account. A source group can be in your own AWS account, or another. For VPC security groups, this action gives one or more CIDR IP address ranges permission to access a security group in your VPC, or gives one or more other security groups (called the source groups) permission to access a security group in your VPC. The groups must all be in the same VPC. Each rule consists of the protocol (e.g., TCP), plus either a CIDR range or a source group. For the TCP and UDP protocols, you must also specify the destination port or port range. For the ICMP protocol, you must also specify the ICMP type and code.You can use -1 for the type or code to mean all types or all codes. Rule changes are propagated to instances within the security group as quickly as possible. However, a small delay might occur.

public authorizeSecurityGroupIngress ( Scalr\Service\Aws\Ec2\DataType\IpPermissionList $ipPermissions, string $groupId = null, string $groupName = null ) : boolean
$ipPermissions	Scalr\Service\Aws\Ec2\DataType\IpPermissionList	Ip permission list object
$groupId	string	optional The ID of the EC2 or VPC security group to modify. The group must belong to your account.
$groupName	string	optional The name of the EC2 security group to modify. It can be used instead of group ID for EC2 security groups.
return	boolean	Returns true on success

copyImage() public method

Initiates the copy of an AMI from the specified source region to the region in which the API call is executed

public copyImage ( string $srcRegion, string $srcImageId, string $name = null, string $description = null, string $clientToken = null, string $destRegion = null ) : string
$srcRegion	string	The ID of the AWS region that contains the AMI to be copied.
$srcImageId	string	The ID of the Amazon EC2 AMI to copy.
$name	string	optional The name of the new Amazon EC2 AMI.
$description	string	optional A description of the new EC2 AMI in the destination region.
$clientToken	string	optional Unique, case-sensitive identifier you provide to ensure idempotency of the request
$destRegion	string	optional The ID of the destination region.
return	string	Returns ID of the created image on success.

copySnapshot() public method

Copies a point-in-time snapshot of an Amazon Elastic Block Store (Amazon EBS) volume and stores it in Amazon Simple Storage Service (Amazon S3).You can copy the snapshot within the same region or from one region to another.You can use the snapshot to create new Amazon EBS volumes or Amazon Machine Images (AMIs)

public copySnapshot ( string $srcRegion, string $srcSnapshotId, string $description = null, string $destRegion = null, string $presignedUrl = null, boolean $encrypted = null, string $kmsKeyId = null ) : string
$srcRegion	string	The ID of the AWS region that contains the snapshot to be copied.
$srcSnapshotId	string	The ID of the Amazon EBS snapshot to copy.
$description	string	optional A description of the new Amazon EBS snapshot.
$destRegion	string	optional The ID of the destination region.
$presignedUrl	string	optional The pre-signed URL that facilitates copying an encrypted snapshot. The PresignedUrl should use the snapshot source endpoint, the CopySnapshot action, and include the SourceRegion, SourceSnapshotId, and DestinationRegion parameters.
$encrypted	boolean	Specifies whether the destination snapshot should be encrypted. There is no way to create an unencrypted snapshot copy from an encrypted snapshot; however, you can encrypt a copy of an unencrypted snapshot with this flag.
$kmsKeyId	string	The full ARN of the AWS Key Management Service (AWS KMS) CMK to use when creating the snapshot copy. This parameter is only required if you want to use a non-default CMK; if this parameter is not specified, the default CMK for EBS is used.
return	string	Returns ID of the created snapshot on success.

createImage() public method

Creates an Amazon EBS-backed AMI from an Amazon EBS-backed instance that is either running or stopped. Note! If you customized your instance with instance store volumes or EBS volumes in addition to the root device volume, the new AMI contains block device mapping information for those volumes. When you launch an instance from this new AMI, the instance automatically launches with those additional volumes.

public createImage ( Scalr\Service\Aws\Ec2\DataType\CreateImageRequestData $request ) : string
$request	Scalr\Service\Aws\Ec2\DataType\CreateImageRequestData	Request object
return	string	Returns ID of the created image on success

createInternetGateway() public method

Creates a new Internet gateway for use with a VPC

public createInternetGateway ( ) : Scalr\Service\Aws\Ec2\DataType\InternetGatewayData
return	Scalr\Service\Aws\Ec2\DataType\InternetGatewayData	Returns InternetGatewayData on success

createKeyPair() public method

Creates a new 2048-bit RSA key pair with the specified name. The public key is stored by Amazon EC2 and the private key is returned to you. The private key is returned as an unencrypted PEM encoded PKCS#8 private key. If a key with the specified name already exists, Amazon EC2 returns an error. Tip! The key pair returned to you works only in the region you're using when you create the key pair. To create a key pair that works in all regions, use ImportKeyPair

public createKeyPair ( string $keyName ) : Scalr\Service\Aws\Ec2\DataType\KeyPairData
$keyName	string	A unique name for the key pair.
return	Scalr\Service\Aws\Ec2\DataType\KeyPairData	Returns KeyPairData on success

createNetworkInterface() public method

Creates a network interface in the specified subnet

public createNetworkInterface ( Scalr\Service\Aws\Ec2\DataType\CreateNetworkInterfaceRequestData $request ) : Scalr\Service\Aws\Ec2\DataType\NetworkInterfaceData
$request	Scalr\Service\Aws\Ec2\DataType\CreateNetworkInterfaceRequestData	Create Request
return	Scalr\Service\Aws\Ec2\DataType\NetworkInterfaceData	Returns created Network Interface

createPlacementGroup() public method

Creates a placement group that you launch cluster instances into.You must give the group a name unique within the scope of your account.

public createPlacementGroup ( string $groupName, string $strategy = 'cluster' ) : boolean
$groupName	string	The name of the placement group.
$strategy	string	optional The placement group strategy.
return	boolean	Returns True on success

createRoute() public method

Creates a route in a route table within a VPC. The route's target can be either a gateway attached to the VPC or a NAT instance in the VPC. When determining how to route traffic, we use the route with the most specific match. For example, let's say the traffic is destined for 192.0.2.3, and the route table includes the following two routes: 192.0.2.0/24 (goes to some target A) 192.0.2.0/28 (goes to some target B) Both routes apply to the traffic destined for 192.0.2.3. However, the second route in the list covers a smaller number of IP addresses and is therefore more specific, so we use that route to determine where to target the traffic. Condition:You must provide only one of the following: a GatewayId, InstanceId, or NetworkInterfaceId.

public createRoute ( string $routeTableId, string $destinationCidrBlock, string $gatewayId = null, string $instanceId = null, string $networkInterfaceId = null, string $vpcPeeringConnectionId = null, string $clientToken = null ) : boolean
$routeTableId	string	The ID of the route table where the route will be added.
$destinationCidrBlock	string	The CIDR address block used for the destination match.
$gatewayId	string	optional The ID of a gataway attached to your VPC.
$instanceId	string	optional The ID of a NAT instance in your VPC.
$networkInterfaceId	string	optional Allows the routing of network interface IDs. Exactly one interface must be attached when specifying an instance ID or it fails.
$vpcPeeringConnectionId	string	optional The ID of a VPC peering connection.
$clientToken	string	optional Unique, case-sensitive identifier you provide to ensure the idempotency of the request.
return	boolean	Returns TRUE on success

createRouteTable() public method

Creates a route table within a VPC. After you create a new route table, you can add routes and associate the table with a subnet

public createRouteTable ( string $vpcId ) : Scalr\Service\Aws\Ec2\DataType\RouteTableData
$vpcId	string	The ID of the VPC
return	Scalr\Service\Aws\Ec2\DataType\RouteTableData	Returns the RouteTableData object on success

createSecurityGroup() public method

Creates a new security group.You can create either an EC2 security group (which works only with EC2), or a VPC security group (which works only with Amazon Virtual Private Cloud). The two types of groups have different capabilities When you create a security group, you give it a friendly name of your choice.You can have an EC2 security group with the same name as a VPC security group (each group has a unique security group ID separate from the name). Two standard groups can't have the same name, and two VPC groups can't have the same name. If you don't specify a security group when you launch an instance, the instance is launched into the default security group. This group (and only this group) includes a default rule that gives the instances in the group unrestricted network access to each other. You have a default EC2 security group for instances you launch with EC2 (i.e., outside a VPC), and a default VPC security group for instances you launch in your VPC.

public createSecurityGroup ( string $groupName, string $groupDescription, string $vpcId = null ) : string
$groupName	string	The name of the security group.
$groupDescription	string	A description of the security group. This is information only.
$vpcId	string	optional The ID of the VPC. (Required for VPC security groups)
return	string	Returns security group ID on success or throws an exception

createSnapshot() public method

Creates a snapshot of an Amazon EBS volume and stores it in Amazon S3.You can use snapshots for backups, to make copies of instance store volumes, and to save data before shutting down an instance.

public createSnapshot ( string $volumeId, string $description = null ) : SnapshotData
$volumeId	string	The ID of the Amazon EBS volume.
$description	string	optional A description of the Amazon EBS snapshot. (Up to 255 characters)
return	Scalr\Service\Aws\Ec2\DataType\SnapshotData	Returns the SnapshotData on success

createSubnet() public method

Creates a subnet in an existing VPC. You can create up to 20 subnets in a VPC. If you add more than one subnet to a VPC, they're set up in a star topology with a logical router in the middle.

public createSubnet ( string $vpcId, string $cidrBlock, string $availabilityZone = null ) : Scalr\Service\Aws\Ec2\DataType\SubnetData
$vpcId	string	The ID of the VPC.
$cidrBlock	string	The CIDR block for the subnet to cover (for example, 10.0.0.0/24).
$availabilityZone	string	optional The Availability Zone for the subnet. By default AWS selects a zone for you (recommended)
return	Scalr\Service\Aws\Ec2\DataType\SubnetData	Returns the SubnetData on success.

createTags() public method

Adds or overwrites one or more tags for the specified EC2 resource or resources. Each resource can have a maximum of 10 tags. Each tag consists of a key and optional value. Tag keys must be unique per resource.

public createTags ( ListDataType $resourceIdList, Scalr\Service\Aws\Ec2\DataType\ResourceTagSetList $tagList ) : boolean
$resourceIdList	Scalr\Service\Aws\DataType\ListDataType	The ID of a resource to tag. For example, ami-1a2b3c4d. You can specify multiple resources to assign the tags to.
$tagList	Scalr\Service\Aws\Ec2\DataType\ResourceTagSetList	The key/value pair list of the Tags.
return	boolean	Returns true on success or throws an exception otherwise

createVolume() public method

Creates an Amazon EBS volume that can be attached to any Amazon EC2 instance in the same Availability Zone. Any AWS Marketplace product codes from the snapshot are propagated to the volume

public createVolume ( CreateVolumeRequestData $request ) : VolumeData
$request	Scalr\Service\Aws\Ec2\DataType\CreateVolumeRequestData	Request that specifies parameters of the volume.
return	Scalr\Service\Aws\Ec2\DataType\VolumeData	Returns the VolumeData on success

createVpc() public method

Creates a VPC with the specified CIDR block. The smallest VPC you can create uses a /28 netmask (16 IP addresses), and the largest uses a /16 netmask (65,536 IP addresses). By default, each instance you launch in the VPC has the default DHCP options, which includes only a default DNS server that we provide (AmazonProvidedDNS)

public createVpc ( string $cidrBlock, string $instanceTenancy = null ) : Scalr\Service\Aws\Ec2\DataType\VpcData
$cidrBlock	string	The CIDR block you want the VPC to cover (for example, 10.0.0.0/16).
$instanceTenancy	string	optional The supported tenancy options for instances launched into the VPC. A value of default means that instances can be launched with any tenancy; a value of dedicated means all instances are launched as dedicated tenancy instances regardless of the tenancy assigned to the instance at launch. Setting the instance tenancy to dedicated runs your instance on single-tenant hardware.
return	Scalr\Service\Aws\Ec2\DataType\VpcData	Returns VpcData

deleteInternetGateway() public method

Deletes an Internet gateway from your AWS account. The gateway must not be attached to a VPC

public deleteInternetGateway ( string $internetGatewayId ) : boolean
$internetGatewayId	string	The ID of the Internet Gateway
return	boolean	Returns TRUE on success

deleteKeyPair() public method

Deletes the specified key pair, by removing the public key from Amazon EC2.You must own the key pair

public deleteKeyPair ( string $keyName ) : boolean
$keyName	string	A unique key name for the key pair.
return	boolean	Returns true on success

deleteNetworkInterface() public method

Deletes the specified network interface.

public deleteNetworkInterface ( string $networkInterfaceId ) : boolean
$networkInterfaceId	string	The ID of the network interface
return	boolean	Returns true on success or throws an exception

deletePlacementGroup() public method

Deletes a placement group from your account.You must terminate all instances in the placement group before deleting it.

public deletePlacementGroup ( string $groupName ) : boolean
$groupName	string	The name of the placement group.
return	boolean	Returns true on success

deleteRoute() public method

Deletes a route table from a VPC. The route table must not be associated with a subnet. You can't delete the main route table

public deleteRoute ( string $routeTableId, string $destinationCidrBlock ) : boolean
$routeTableId	string	The ID of the Route Table.
$destinationCidrBlock	string	The CIDR range for the route to delete.
return	boolean	Returns TRUE on success

deleteRouteTable() public method

Deletes a route table from a VPC. The route table must not be associated with a subnet. You can't delete the main route table

public deleteRouteTable ( string $routeTableId ) : boolean
$routeTableId	string	The ID of the Route Table
return	boolean	Returns TRUE on success

deleteSecurityGroup() public method

Deletes a security group. This action applies to both EC2 security groups and VPC security groups. For information about VPC security groups and how they differ from EC2 security groups, see Security Groups in the Amazon Virtual Private Cloud User Guide. Note! If you attempt to delete a security group that contains instances, or attempt to delete a security group that is referenced by another security group, an error is returned. For example, if security group B has a rule that allows access from security group A, security group A cannot be deleted until the rule is removed. The fault returned is InvalidGroup.InUse for EC2 security groups, or DependencyViolation for VPC security groups.

public deleteSecurityGroup ( string $groupId = null, string $groupName = null ) : boolean
$groupId	string	optional The ID of the security group to remove.
$groupName	string	optional The name of security group to remove.
return	boolean	Returns true on success or throws an exception.

deleteSnapshot() public method

Deletes a snapshot of an Amazon EBS volume. Note! If you make periodic snapshots of a volume, the snapshots are incremental so that only the blocks on the device that have changed since your last snapshot are incrementally saved in the new snapshot. Even though snapshots are saved incrementally, the snapshot deletion process is designed so that you need to retain only the most recent snapshot in order to restore the volume.

public deleteSnapshot ( string $snapshotId ) : boolean
$snapshotId	string	The ID of the Amazon EBS snapshot.
return	boolean	Returns TRUE on success

deleteSubnet() public method

Deletes a subnet from a VPC. You must terminate all running instances in the subnet before deleting it, otherwise Amazon VPC returns an error

public deleteSubnet ( string $subnetId ) : boolean
$subnetId	string	The ID of the subnet.
return	boolean	Returns TRUE on success.

deleteTags() public method

Deletes a specific set of tags from a specific set of resources. This call is designed to follow a DescribeTags call. You first determine what tags a resource has, and then you call DeleteTags with the resource ID and the specific tags you want to delete.

public deleteTags ( ListDataType $resourceIdList, Scalr\Service\Aws\Ec2\DataType\ResourceTagSetList $tagList ) : boolean
$resourceIdList	Scalr\Service\Aws\DataType\ListDataType	The ID of a resource to tag. For example, ami-1a2b3c4d. You can specify multiple resources to assign the tags to.
$tagList	Scalr\Service\Aws\Ec2\DataType\ResourceTagSetList	The key/value pair list of the Tags.
return	boolean	Returns true on success or throws an exception otherwise

deleteVolume() public method

Deletes an Amazon EBS volume. The volume must be in the available state (not attached to an instance)

public deleteVolume ( string $volumeId ) : boolean
$volumeId	string	The ID of the volume.
return	boolean	Returns true on success or throws an exception otherwise

deleteVpc() public method

Deletes a VPC.You must detach or delete all gateways or other objects that are dependent on the VPC first. For example, you must terminate all running instances, delete all security groups (except the default), delete all the route tables (except the default), and so on.

public deleteVpc ( string $vpcId ) : boolean
$vpcId	string	The ID of the VPC
return	boolean	Returns true on success or throws an exception

deregisterImage() public method

Deregisters the specified AMI. Once deregistered, the AMI cannot be used to launch new instances. Note! This command does not delete the AMI.

public deregisterImage ( string $imageId ) : boolean
$imageId	string	The ID of the AMI
return	boolean	Returns true on success

describeAccountAttributes() public method

Describes the specified attribute of your AWS account.

public describeAccountAttributes ( ListDataType $attributeName ) : Scalr\Service\Aws\Ec2\DataType\AccountAttributeSetList
$attributeName	Scalr\Service\Aws\DataType\ListDataType	List of the The following table lists the supported account attributes
return	Scalr\Service\Aws\Ec2\DataType\AccountAttributeSetList	Returns list of the names and values of the requested attributes

describeAddresses() public method

Describes one or more of the Elastic IP addresses allocated to your account. This action applies to both EC2 and VPC Elastic IP addresses.

public describeAddresses ( ListDataType $publicIpList = null, ListDataType $allocationIdList = null, Scalr\Service\Aws\Ec2\DataType\AddressFilterList $filter = null ) : Scalr\Service\Aws\Ec2\DataType\AddressList
$publicIpList	Scalr\Service\Aws\DataType\ListDataType	optional One or more EC2 Elastic IP addresses
$allocationIdList	Scalr\Service\Aws\DataType\ListDataType	optional One or more allocation IDs corresponding to the address or addresses to describe (VPC addresses only).
$filter	Scalr\Service\Aws\Ec2\DataType\AddressFilterList	optional The filter list.
return	Scalr\Service\Aws\Ec2\DataType\AddressList	Returns AddressList on success

describeAvailabilityZones() public method

Describes one or more of the Availability Zones that are currently available to the account. The results include zones only for the region you're currently using. Note! Availability Zones are not the same across accounts.The Availability Zone us-east-1a for account A is not necessarily the same as us-east-1a for account B. Zone assignments are mapped independently for each account.

public describeAvailabilityZones ( ListDataType $zoneName = null, Scalr\Service\Aws\Ec2\DataType\AvailabilityZoneFilterList $filter = null ) : Scalr\Service\Aws\Ec2\DataType\AvailabilityZoneList
$zoneName	Scalr\Service\Aws\DataType\ListDataType	optional Zone Name List to filter.
$filter	Scalr\Service\Aws\Ec2\DataType\AvailabilityZoneFilterList	optional Filter to apply.
return	Scalr\Service\Aws\Ec2\DataType\AvailabilityZoneList	Returns the list of Availability Zones

describeImages() public method

Describes the images (AMIs, AKIs, and ARIs) available to you. Images available to you include public images, private images that you own, and private images owned by other AWS accounts but for which you have explicit launch permissions.

public describeImages ( ListDataType $imageIdList = null, ListDataType $ownerList = null, Scalr\Service\Aws\Ec2\DataType\ImageFilterList $filter = null, ListDataType $executableByList = null ) : Scalr\Service\Aws\Ec2\DataType\ImageList
$imageIdList	Scalr\Service\Aws\DataType\ListDataType	optional One or more AMI IDs.
$ownerList	Scalr\Service\Aws\DataType\ListDataType	optional The AMIs owned by the specified owner. Multiple owner values can be specified. The IDs amazon, aws-marketplace, and self can be used to include AMIs owned by Amazon, AWS Marketplace, or AMIs owned by you, respectively. Valid values: amazon \| aws-marketplace \| self \| AWS account ID \| all
$filter	Scalr\Service\Aws\Ec2\DataType\ImageFilterList	optional Filter list
$executableByList	Scalr\Service\Aws\DataType\ListDataType	optional The AMIs for which the specified user ID has explicit launch permissions. The user ID can be an AWS account ID, self to return AMIs for which the sender of the request has explicit launch permissions, or all to return AMIs with public launch permissions.
return	Scalr\Service\Aws\Ec2\DataType\ImageList	Returns the list of Images on success or throws an exception otherwise

describeInstanceAttribute() public method

Describes an attribute of the specified instance

public describeInstanceAttribute ( string $instanceId, Scalr\Service\Aws\Ec2\DataType\InstanceAttributeType $attribute ) : mixed
$instanceId	string	The ID of the Instance.
$attribute	Scalr\Service\Aws\Ec2\DataType\InstanceAttributeType	The attribute.
return	mixed	Returns attribute value. It may be scalar value or stdClass object depends on attribute.

describeInstanceStatus() public method

DescribeInstanceStatus action

public describeInstanceStatus ( ListDataType $instanceIdList = null, boolean $includeAllInstances = null, Scalr\Service\Aws\Ec2\DataType\InstanceStatusFilterList $filter = null, string $nextToken = null, integer $maxResults = null ) : Scalr\Service\Aws\Ec2\DataType\InstanceStatusList
$instanceIdList	Scalr\Service\Aws\DataType\ListDataType	optional The list of the instance IDs
$includeAllInstances	boolean	optional When true, returns the health status for all instances (for example, running, stopped, pending, shutting down).When false, returns only the health status for running instances.
$filter	Scalr\Service\Aws\Ec2\DataType\InstanceStatusFilterList	optional A Filter
$nextToken	string	The next paginated set of results to return
$maxResults	integer	The maximum number of paginated instance items per response.
return	Scalr\Service\Aws\Ec2\DataType\InstanceStatusList	Returns the list of the InstanceStatusData objects

describeInstances() public method

Describes one or more of your instances. If you specify one or more instance IDs, Amazon EC2 returns information for those instances. If you do not specify instance IDs, Amazon EC2 returns information for all relevant instances. If you specify an invalid instance ID, an error is returned. If you specify an instance that you do not own, it is not included in the returned results. Recently terminated instances might appear in the returned results. This interval is usually less than one hour.

public describeInstances ( ListDataType $instanceIdList = null, Scalr\Service\Aws\Ec2\DataType\InstanceFilterList $filter = null, string $nextToken = null, integer $maxResults = null ) : Scalr\Service\Aws\Ec2\DataType\ReservationList
$instanceIdList	Scalr\Service\Aws\DataType\ListDataType	optional One or more instance IDs
$filter	Scalr\Service\Aws\Ec2\DataType\InstanceFilterList	optional A Filter list
$nextToken	string	The next paginated set of results to return
$maxResults	integer	The maximum number of paginated instance items per response.
return	Scalr\Service\Aws\Ec2\DataType\ReservationList	Returns List of the reservations on success

describeInternetGateways() public method

Describes one or more of your Internet gateways.

public describeInternetGateways ( ListDataType $internetGatewayIdList = null, Scalr\Service\Aws\Ec2\DataType\InternetGatewayFilterList $filter = null ) : Scalr\Service\Aws\Ec2\DataType\InternetGatewayList
$internetGatewayIdList	Scalr\Service\Aws\DataType\ListDataType	optional The list of Internet gateway identifiers.
$filter	Scalr\Service\Aws\Ec2\DataType\InternetGatewayFilterList	optional The filter list.
return	Scalr\Service\Aws\Ec2\DataType\InternetGatewayList	Returns InternetGatewayList on success

describeKeyPairs() public method

Describes one or more of your key pairs.

public describeKeyPairs ( ListDataType $keyNameList = null, array $filter = null ) : Scalr\Service\Aws\Ec2\DataType\KeyPairList
$keyNameList	Scalr\Service\Aws\DataType\ListDataType	optional The list of the names
$filter	array	optional Array of the key => value properties.
return	Scalr\Service\Aws\Ec2\DataType\KeyPairList	Returns KeyPairList on success

describeNetworkInterfaceAttribute() public method

Describes a network interface attribute.You can specify only one attribute at a time.

public describeNetworkInterfaceAttribute ( string $networkInterfaceId, Scalr\Service\Aws\Ec2\DataType\NetworkInterfaceAttributeType $attribute ) : mixed
$networkInterfaceId	string	The ID of the network interface.
$attribute	Scalr\Service\Aws\Ec2\DataType\NetworkInterfaceAttributeType	The attribute.
return	mixed	Returns attribute value. It can be string, boolean, NetworkInterfaceAttachmentData or GroupList depends on attribute value you provided.

describeNetworkInterfaces() public method

Describes one or more of your network interfaces.

public describeNetworkInterfaces ( ListDataType $networkInterfaceIdList = null, Scalr\Service\Aws\Ec2\DataType\NetworkInterfaceFilterList $filter = null ) : Scalr\Service\Aws\Ec2\DataType\NetworkInterfaceList
$networkInterfaceIdList	Scalr\Service\Aws\DataType\ListDataType	optional One or more network interface IDs
$filter	Scalr\Service\Aws\Ec2\DataType\NetworkInterfaceFilterList	optional Filter list
return	Scalr\Service\Aws\Ec2\DataType\NetworkInterfaceList	Returns the list of the Network Interfaces

describePlacementGroups() public method

Describes one or more of your placement groups.

public describePlacementGroups ( ListDataType $groupNameList = null, Scalr\Service\Aws\Ec2\DataType\PlacementGroupFilterList $filter = null ) : Scalr\Service\Aws\Ec2\DataType\PlacementGroupList
$groupNameList	Scalr\Service\Aws\DataType\ListDataType	optional One or more placement group names.
$filter	Scalr\Service\Aws\Ec2\DataType\PlacementGroupFilterList	optional The list of the filters.
return	Scalr\Service\Aws\Ec2\DataType\PlacementGroupList	Returns the list of the PlacementGroupData objects on success

describeRegions() public method

DescribeRegions action

public describeRegions ( ) : Scalr\Service\Aws\Ec2\DataType\RegionInfoList
return	Scalr\Service\Aws\Ec2\DataType\RegionInfoList	Returns the list of the RegionInfoData objects on success

describeReservedInstances() public method

Describes one or more of the Reserved Instances that you purchased. Starting with the 2011-11-01 API version, AWS expanded its offering of Amazon EC2 Reserved Instances to address a range of projected instance use. There are three types of Reserved Instances based on customer utilization levels: Heavy Utilization, Medium Utilization, and Light Utilization.You determine the type of the Reserved Instances offerings by including the optional offeringType parameter.The Medium Utilization offering type is equivalent to the Reserved Instance offering available before API version 2011-11-01. If you are using tools that predate the 2011-11-01 API version, you only have access to the Medium Utilization Reserved Instance offering type.

public describeReservedInstances ( ListDataType $reservedInstanceIdList = null, Scalr\Service\Aws\Ec2\DataType\ReservedInstanceFilterList $filter = null, Scalr\Service\Aws\Ec2\DataType\OfferingType $offeringType = null ) : Scalr\Service\Aws\Ec2\DataType\ReservedInstanceList
$reservedInstanceIdList	Scalr\Service\Aws\DataType\ListDataType	optional One or more instance IDs
$filter	Scalr\Service\Aws\Ec2\DataType\ReservedInstanceFilterList	optional A Filter list
$offeringType	Scalr\Service\Aws\Ec2\DataType\OfferingType	optional The Reserved Instance offering type. If you are using tools that predate the 2011-11-01 API version, you only have access to the Medium Utilization Reserved Instance offering type.
return	Scalr\Service\Aws\Ec2\DataType\ReservedInstanceList	Returns reserved list of the reserved instances

describeRouteTables() public method

Describes one or more of your route tables.

public describeRouteTables ( ListDataType $routeTableIdList = null, Scalr\Service\Aws\Ec2\DataType\RouteTableFilterList $filter = null ) : Scalr\Service\Aws\Ec2\DataType\RouteTableList
$routeTableIdList	Scalr\Service\Aws\DataType\ListDataType	optional The list of Route Table IDs
$filter	Scalr\Service\Aws\Ec2\DataType\RouteTableFilterList	optional The filter list
return	Scalr\Service\Aws\Ec2\DataType\RouteTableList	Returns the list of the RouteTableData objects on success

describeSecurityGroups() public method

Describes one or more of your security groups. This includes both EC2 security groups and VPC security groups

public describeSecurityGroups ( ListDataType $groupName = null, ListDataType $groupId = null, Scalr\Service\Aws\Ec2\DataType\SecurityGroupFilterList $filter = null ) : Scalr\Service\Aws\Ec2\DataType\SecurityGroupList
$groupName	Scalr\Service\Aws\DataType\ListDataType	optional One or more security group names.
$groupId	Scalr\Service\Aws\DataType\ListDataType	optional One or more security group IDs.
$filter	Scalr\Service\Aws\Ec2\DataType\SecurityGroupFilterList	optional The name/value pairs list for the filter.
return	Scalr\Service\Aws\Ec2\DataType\SecurityGroupList	Returns SecurityGroupList

describeSnapshots() public method

Describes one or more of the Amazon EBS snapshots available to you. Snapshots available to you include public snapshots available for any AWS account to launch, private snapshots you own, and private snapshots owned by another AWS account but for which you've been given explicit create volume permissions.

public describeSnapshots ( ListDataType $snapshotIdList = null, ListDataType $ownerList = null, Scalr\Service\Aws\Ec2\DataType\SnapshotFilterList $filter = null, ListDataType $restorableByList = null, string $nextToken = null, integer $maxResults = null ) : Scalr\Service\Aws\Ec2\DataType\SnapshotList
$snapshotIdList	Scalr\Service\Aws\DataType\ListDataType	optional One or more snapshot IDs. By default it describes snapshots for which you have launch permissions.
$ownerList	Scalr\Service\Aws\DataType\ListDataType	optional Returns the snapshots owned by the specified owner. Multiple owners can be specified. Valid values: self \| amazon \| AWS Account ID
$filter	Scalr\Service\Aws\Ec2\DataType\SnapshotFilterList	optional The list of filters.
$restorableByList	Scalr\Service\Aws\DataType\ListDataType	optional One or more AWS accounts IDs that can create volumes from the snapshot.
$nextToken	string	The next paginated set of results to return
$maxResults	integer	The maximum number of paginated snapshots items per response.
return	Scalr\Service\Aws\Ec2\DataType\SnapshotList	Returns the list of snapshots on success

describeSubnets() public method

Describes one or more of your subnets.

public describeSubnets ( ListDataType $subnetIdList = null, Scalr\Service\Aws\Ec2\DataType\SubnetFilterList $filter = null ) : Scalr\Service\Aws\Ec2\DataType\SubnetList
$subnetIdList	Scalr\Service\Aws\DataType\ListDataType	optional A subnet ID list.
$filter	Scalr\Service\Aws\Ec2\DataType\SubnetFilterList	optional The list of the filters.
return	Scalr\Service\Aws\Ec2\DataType\SubnetList	Returns the list of found subnets on success.

describeVolumes() public method

Describes one or more of your Amazon EBS volumes.

public describeVolumes ( ListDataType $volumeIdList = null, Scalr\Service\Aws\Ec2\DataType\VolumeFilterList $filter = null, string $nextToken = null, integer $maxResults = null ) : Scalr\Service\Aws\Ec2\DataType\VolumeList
$volumeIdList	Scalr\Service\Aws\DataType\ListDataType	optional The list of Volume ID
$filter	Scalr\Service\Aws\Ec2\DataType\VolumeFilterList	optional The filter list
$nextToken	string	The next paginated set of results to return
$maxResults	integer	The maximum number of paginated volumes items per response.
return	Scalr\Service\Aws\Ec2\DataType\VolumeList	Returns the list of the volumes

describeVpcs() public method

Describes one or more of your VPCs.

public describeVpcs ( ListDataType $vpcIdList = null, Scalr\Service\Aws\Ec2\DataType\VpcFilterList $filter = null ) : Scalr\Service\Aws\Ec2\DataType\VpcList
$vpcIdList	Scalr\Service\Aws\DataType\ListDataType	optional The list of the VpcID
$filter	Scalr\Service\Aws\Ec2\DataType\VpcFilterList	optional The filter list
return	Scalr\Service\Aws\Ec2\DataType\VpcList	Returns the list of the Vpcs

detachInternetGateway() public method

Detaches an Internet gateway from a VPC, disabling connectivity between the Internet and the VPC

public detachInternetGateway ( string $internetGatewayId, string $vpcId ) : boolean
$internetGatewayId	string	The ID of the internet gateway
$vpcId	string	The ID of the VPC
return	boolean	Returns TRUE on success

detachNetworkInterface() public method

Detaches a network interface from an instance

public detachNetworkInterface ( string $attachmentId, boolean $force = null ) : boolean
$attachmentId	string	The ID of the Attachment
$force	boolean	optional Set to TRUE to force a detachment
return	boolean	Returns TRUE on success or throws an exception

detachVolume() public method

Detaches an Amazon EBS volume from an instance. Make sure to unmount any file systems on the device within your operating system before detaching the volume. Failure to do so will result in volume being stuck in "busy" state while detaching. Note! If an Amazon EBS volume is the root device of an instance, it cannot be detached while the instance is in the "running" state. To detach the root volume, stop the instance first. If the root volume is detached from an instance with an AWS Marketplace product code, then the AWS Marketplace product codes from that volume are no longer associated with the instance.

public detachVolume ( string $volumeId, string $instanceId = null, string $device = null, boolean $force = null ) : AttachmentSetResponseData
$volumeId	string	The ID of the EBS volume.
$instanceId	string	optional The ID of the Instance.
$device	string	optional The device name.
$force	boolean	optional Forces detachment if the previous detachment attempt did not occur cleanly (logging into an instance, unmounting the volume, and detaching normally). This option can lead to data loss or a corrupted file system. Use this option only as a last resort to detach a volume from a failed instance. The instance won't have an opportunity to flush file system caches or file system metadata. If you use this option, you must perform file system check and repair procedures.
return	Scalr\Service\Aws\Ec2\DataType\AttachmentSetResponseData	Returns AttachmentSetResponseData on success

disassociateAddress() public method

Disassociates an Elastic IP address from the instance it's assigned to. This action applies to both EC2 Elastic IP addresses and VPC Elastic IP addresses. This is an idempotent action. If you enter it more than once, Amazon EC2 does not return an error

public disassociateAddress ( string $publicIp = null, string $associationId = null ) : boolean
$publicIp	string	optional The EC2 Elastic IP address. Condition: Required for EC2 Elastic IP addresses
$associationId	string	optional The association ID corresponding to the VPC Elastic IP Conditional address. Condition: Required for VPC Elastic IP addresses
return	boolean	Returns true on success

disassociateRouteTable() public method

Disassociates a subnet from a route table. After you perform this action, the subnet no longer uses the routes in the route table. Instead, it uses the routes in the VPC's main route table.

public disassociateRouteTable ( string $associationId ) : boolean
$associationId	string	The association ID representing the current association between the route table and subnet.
return	boolean	Returns TRUE on success

getConsoleOutput() public method

Retrieves console output for the specified instance. Instance console output is buffered and posted shortly after instance boot, reboot, and termination. Amazon EC2 preserves the most recent 64 KB output which will be available for at least one hour after the most recent post.

public getConsoleOutput ( string $instanceId ) : GetConsoleOutputResponseData
$instanceId	string	The ID of the EC2 instance.
return	Scalr\Service\Aws\Ec2\DataType\GetConsoleOutputResponseData	Returns object which represents console output.

getEntityManager() public method

Gets an entity manager

public getEntityManager ( ) : Scalr\Service\Aws\EntityManager
return	Scalr\Service\Aws\EntityManager

getInstanceIdListQuery() public method

It transforms 'Instances.member.N.InstanceId' structure to acceptable 'InstancesId.N' structure

public getInstanceIdListQuery ( ListDataType $instanceIdList, string $name = 'InstanceId' ) : array
$instanceIdList	Scalr\Service\Aws\DataType\ListDataType	The list of the Instance ID
$name	string	optional URL parameter name
return	array	Returns array of the query parameters for the request

getPasswordData() public method

Retrieves the encrypted administrator password for an instance running Windows. Note! The Windows password is only generated the first time an AMI is launched. It is not generated for rebundled AMIs or after the password is changed on an instance. The password is encrypted using the key pair that you provided.

public getPasswordData ( string $instanceId ) : GetPasswordDataResponseData
$instanceId	string	A Windows instance ID.
return	Scalr\Service\Aws\Ec2\DataType\GetPasswordDataResponseData	Returns object which represents console output.

modifyInstanceAttribute() public method

Modifies the specified attribute of the specified instance. You can specify only one attribute at a time. To modify some attributes, the instance must be stopped.

public modifyInstanceAttribute ( string $instanceId, Scalr\Service\Aws\Ec2\DataType\InstanceAttributeType $attribute, mixed $value ) : boolean
$instanceId	string	The ID of the Instance.
$attribute	Scalr\Service\Aws\Ec2\DataType\InstanceAttributeType	The attribute name.
$value	mixed	The attribute value can be string, boolean, array or object depends on attribute name.
return	boolean	Returns TRUE on success

modifyNetworkInterfaceAttribute() public method

Modifies a network interface attribute.You can specify only one attribute at a time.

public modifyNetworkInterfaceAttribute ( string $networkInterfaceId, Scalr\Service\Aws\Ec2\DataType\NetworkInterfaceAttributeType $attr, mixed $value ) : boolean
$networkInterfaceId	string	The ID of the network interface.
$attr	Scalr\Service\Aws\Ec2\DataType\NetworkInterfaceAttributeType	The attribute name.
$value	mixed	The attribute value.
return	boolean	Returns TRUE on success

monitorInstances() public method

Enables monitoring for a running instance.

public monitorInstances ( ListDataType $instanceIdList ) : Scalr\Service\Aws\Ec2\DataType\MonitorInstancesResponseSetList
$instanceIdList	Scalr\Service\Aws\DataType\ListDataType	One or more instance IDs
return	Scalr\Service\Aws\Ec2\DataType\MonitorInstancesResponseSetList	Returns the MonitorInstancesResponseSetList

rebootInstances() public method

Requests a reboot of one or more instances. This operation is asynchronous; it only queues a request to reboot the specified instance(s). The operation will succeed if the instances are valid and belong to you. Requests to reboot terminated instances are ignored. Note! If a Linux/UNIX instance does not cleanly shut down within four minutes, Amazon EC2 will perform a hard reboot.

public rebootInstances ( ListDataType $instanceIdList ) : boolean
$instanceIdList	Scalr\Service\Aws\DataType\ListDataType	The list of the Instance IDs
return	boolean	Returns true on success or throws an exception otherwise

registerImage() public method

Registers a new AMI with Amazon EC2. When you're creating an AMI, this is the final step you must complete before you can launch an instance from the AMI

public registerImage ( Scalr\Service\Aws\Ec2\DataType\RegisterImageData $request ) : string
$request	Scalr\Service\Aws\Ec2\DataType\RegisterImageData	Register Image request
return	string	Returns the ID of the newly registered AMI

releaseAddress() public method

Releases an Elastic IP address allocated to your account. Important! After releasing an Elastic IP address, it is released to the IP address pool and might be unavailable to your account. Make sure to update your DNS records and any servers or devices that communicate with the address.

public releaseAddress ( string $publicIp = null, string $allocationId = null ) : boolean
$publicIp	string	optional The EC2 Elastic IP address
$allocationId	string	optional The allocation ID that AWS provided when you allocated the address for use with Amazon VPC.
return	boolean	Returns true on success

replaceRoute() public method

Replaces an existing route within a route table in a VPC Condition:You must provide only one of the following: a GatewayId, InstanceId, or NetworkInterfaceId.

public replaceRoute ( string $routeTableId, string $destinationCidrBlock, string $gatewayId = null, string $instanceId = null, string $networkInterfaceId = null, string $vpcPeeringConnectionId = null ) : boolean
$routeTableId	string	The ID of the route table where the route will be added.
$destinationCidrBlock	string	The CIDR address block used for the destination match.
$gatewayId	string	optional The ID of a gataway attached to your VPC.
$instanceId	string	optional The ID of a NAT instance in your VPC.
$networkInterfaceId	string	optional Allows the routing of network interface IDs. Exactly one interface must be attached when specifying an instance ID or it fails.
$vpcPeeringConnectionId	string	optional The ID of a VPC peering connection.
return	boolean	Returns TRUE on success

replaceRouteTableAssociation() public method

Changes the route table associated with a given subnet in a VPC. After you execute this action, the subnet uses the routes in the new route table it's associated with. You can also use this action to change which table is the main route table in the VPC. You just specify the main route table's association ID and the route table that you want to be the new main route table.

public replaceRouteTableAssociation ( string $routeTableId, string $associationId ) : string
$routeTableId	string	The ID of the new route table to associate with the subnet.
$associationId	string	The ID representing the current association between the original route table and the subnet.
return	string	Returns the ID of the new association on success

resetNetworkInterfaceAttribute() public method

Resets a network interface attribute.You can specify only one attribute at a time

public resetNetworkInterfaceAttribute ( string $networkInterfaceId, Scalr\Service\Aws\Ec2\DataType\NetworkInterfaceAttributeType $attr ) : boolean
$networkInterfaceId	string	The ID of the network interface.
$attr	Scalr\Service\Aws\Ec2\DataType\NetworkInterfaceAttributeType	The attribute name.
return	boolean	Returns TRUE on success

revokeSecurityGroupEgress() public method

Removes one or more egress rules from a security group for EC2-VPC. The values that you specify in the revoke request (for example, ports) must match the existing rule's values for the rule to be revoked. Each rule consists of the protocol and the CIDR range or destination security group. For the TCP and UDP protocols, you must also specify the destination port or range of ports. For the ICMP protocol, you must also specify the ICMP type and code. Rule changes are propagated to instances within the security group as quickly as possible. However, a small delay might occur.

public revokeSecurityGroupEgress ( Scalr\Service\Aws\Ec2\DataType\IpPermissionList $ipPermissions, string $groupId ) : boolean
$ipPermissions	Scalr\Service\Aws\Ec2\DataType\IpPermissionList	Ip permission list object
$groupId	string	optional The ID of the security group to modify.
return	boolean	Returns true on success

revokeSecurityGroupIngress() public method

This action applies to both EC2 security groups and VPC security groups. This action removes one or more ingress rules from a security group. The values that you specify in the revoke request (e.g., ports, etc.) must match the existing rule's values for the rule to be removed. Each rule consists of the protocol and the CIDR range or source security group. For the TCP and UDP protocols, you must also specify the destination port or range of ports. For the ICMP protocol, you must also specify the ICMP type and code. Rule changes are propagated to instances within the security group as quickly as possible. However, depending on the number of instances, a small delay might occur

public revokeSecurityGroupIngress ( Scalr\Service\Aws\Ec2\DataType\IpPermissionList $ipPermissions, string $groupId = null, string $groupName = null ) : boolean
$ipPermissions	Scalr\Service\Aws\Ec2\DataType\IpPermissionList	Ip permission list object
$groupId	string	optional The ID of the EC2 or VPC security group to modify. The group must belong to your account.
$groupName	string	optional The name of the EC2 security group to modify. It can be used instead of group ID for EC2 security groups.
return	boolean	Returns true on success

runInstances() public method

Launches the specified number of instances of an AMI for which you have permissions. If Amazon EC2 cannot launch the minimum number of instances you request, no instances will be launched. If there is insufficient capacity to launch the maximum number of instances you request, Amazon EC2 launches the minimum number specified and allocates the remaining available instances using round robin. Note! Every instance is launched in a security group (created using the CreateSecurityGroup operation). If you don't specify a security group in the RunInstances request, the "default" security group is used.

public runInstances ( Scalr\Service\Aws\Ec2\DataType\RunInstancesRequestData $request ) : Scalr\Service\Aws\Ec2\DataType\ReservationData
$request	Scalr\Service\Aws\Ec2\DataType\RunInstancesRequestData	Request data
return	Scalr\Service\Aws\Ec2\DataType\ReservationData	Returns the ReservationData object

startInstances() public method

Starts an Amazon EBS-backed AMI that you've previously stopped. Instances that use Amazon EBS volumes as their root devices can be quickly stopped and started. When an instance is stopped, the compute resources are released and you are not billed for hourly instance usage. However, your root partition Amazon EBS volume remains, continues to persist your data, and you are charged for Amazon EBS volume usage. You can restart your instance at any time. Each time you transition an instance from stopped to started, we charge a full instance hour, even if transitions happen multiple times within a single hour. Note! Before stopping an instance, make sure it is in a state from which it can be restarted. Stopping an instance does not preserve data stored in RAM. Performing this operation on an instance that uses an instance store as its root device returns an error.

public startInstances ( ListDataType $instanceIdList ) : Scalr\Service\Aws\Ec2\DataType\InstanceStateChangeList
$instanceIdList	Scalr\Service\Aws\DataType\ListDataType	One or more instance IDs.
return	Scalr\Service\Aws\Ec2\DataType\InstanceStateChangeList	Return the InstanceStateChangeList

stopInstances() public method

Stops an Amazon EBS-backed instance. Each time you transition an instance from stopped to started, we charge a full instance hour, even if transitions happen multiple times within a single hour. Important! Although Spot Instances can use Amazon EBS-backed AMIs, they don't support Stop/Start. In other words, you can't stop and start Spot Instances launched from an AMI with an Amazon EBS root device. Instances that use Amazon EBS volumes as their root devices can be quickly stopped and started.When an instance is stopped, the compute resources are released and you are not billed for hourly instance usage. However, your root partition Amazon EBS volume remains, continues to persist your data, and you are charged for Amazon EBS volume usage.You can restart your instance at any time. Note! Before stopping an instance, make sure it is in a state from which it can be restarted. Stopping an instance does not preserve data stored in RAM. Performing this operation on an instance that uses an instance store as its root device returns an error. You can stop, start, and terminate EBS-backed instances.You can only terminate S3-backed instances. What happens to an instance differs if you stop it or terminate it. For example, when you stop an instance, the root device and any other devices attached to the instance persist. When you terminate an instance, the root device and any other devices attached during the instance launch are automatically deleted

public stopInstances ( ListDataType $instanceIdList, boolean $force = null ) : Scalr\Service\Aws\Ec2\DataType\InstanceStateChangeList
$instanceIdList	Scalr\Service\Aws\DataType\ListDataType	One or more instance IDs.
$force	boolean	optional Forces the instance to stop. The instance will not have an opportunity to flush file system caches or file system metadata. If you use this option, you must perform file system check and repair procedures. This option is not recommended for Windows instances.
return	Scalr\Service\Aws\Ec2\DataType\InstanceStateChangeList	Return the InstanceStateChangeList

terminateInstances() public method

Shuts down one or more instances. This operation is idempotent; if you terminate an instance more than once, each call will succeed. Terminated instances will remain visible after termination (approximately one hour). Note! By default, Amazon EC2 deletes all Amazon EBS volumes that were attached when the instance launched. Amazon EBS volumes attached after instance launch continue running. You can stop, start, and terminate EBS-backed instances.You can only terminate S3-backed instances. What happens to an instance differs if you stop it or terminate it. For example, when you stop an instance, the root device and any other devices attached to the instance persist. When you terminate an instance, the root device and any other devices attached during the instance launch are automatically deleted.

public terminateInstances ( ListDataType $instanceIdList ) : Scalr\Service\Aws\Ec2\DataType\InstanceStateChangeList
$instanceIdList	Scalr\Service\Aws\DataType\ListDataType
return	Scalr\Service\Aws\Ec2\DataType\InstanceStateChangeList	Returns the InstanceStateChangeList

unmonitorInstances() public method

Disables monitoring for a running instance

public unmonitorInstances ( ListDataType $instanceIdList ) : Scalr\Service\Aws\Ec2\DataType\MonitorInstancesResponseSetList
$instanceIdList	Scalr\Service\Aws\DataType\ListDataType	One or more instance IDs
return	Scalr\Service\Aws\Ec2\DataType\MonitorInstancesResponseSetList	Returns the MonitorInstancesResponseSetList

Property Details

$ec2 protected_oe property

protected Ec2,Scalr\Service\Aws $ec2
return	Scalr\Service\Aws\Ec2

$versiondate protected_oe property

protected string $versiondate
return	string