PHP Класс AMQPConnection

__construct() публичный Метод

Creates an AMQPConnection instance representing a connection to an AMQP broker. A connection will not be established until AMQPConnection::connect() is called. $credentials = array( 'host' => amqp.host The host to connect too. Note: Max 1024 characters. 'port' => amqp.port Port on the host. 'vhost' => amqp.vhost The virtual host on the host. Note: Max 128 characters. 'login' => amqp.login The login name to use. Note: Max 128 characters. 'password' => amqp.password Password. Note: Max 128 characters. 'read_timeout' => Timeout in for income activity. Note: 0 or greater seconds. May be fractional. 'write_timeout' => Timeout in for outcome activity. Note: 0 or greater seconds. May be fractional. 'connect_timeout' => Connection timeout. Note: 0 or greater seconds. May be fractional. Connection tuning options (see http://www.rabbitmq.com/amqp-0-9-1-reference.html#connection.tune for details): 'channel_max' => Specifies highest channel number that the server permits. 0 means standard extension limit (see PHP_AMQP_MAX_CHANNELS constant) 'frame_max' => The largest frame size that the server proposes for the connection, including frame header and end-byte. 0 means standard extension limit (depends on librabbimq default frame size limit) 'heartbeat' => The delay, in seconds, of the connection heartbeat that the server wants. 0 means the server does not want a heartbeat. Note, librabbitmq has limited heartbeat support, which means heartbeats checked only during blocking calls. TLS support (see https://www.rabbitmq.com/ssl.html for details): 'cacert' => Path to the CA cert file in PEM format.. 'cert' => Path to the client certificate in PEM foramt. 'key' => Path to the client key in PEM format. 'verify' => Enable or disable peer verification. If peer verification is enabled then the common name in the server certificate must match the server name. Peer verification is enabled by default. )

public __construct ( array $credentials = [] )
$credentials	array	Optional array of credential information for connecting to the AMQP broker.

connect() публичный Метод

This method will initiate a connection with the AMQP broker.

public connect ( ) : boolean
Результат	boolean	TRUE on success or throw an exception on failure.

disconnect() публичный Метод

This method will close an open connection with the AMQP broker.

public disconnect ( ) : boolean
Результат	boolean	true if connection was successfully closed, false otherwise.

getCACert() публичный Метод

Get path to the CA cert file in PEM format

public getCACert ( ) : string
Результат	string

getCert() публичный Метод

Get path to the client certificate in PEM format

public getCert ( ) : string
Результат	string

getHeartbeatInterval() публичный Метод

When connection is connected, effective connection value returned, which is normally the same as original correspondent value passed to constructor, otherwise original value passed to constructor returned.

public getHeartbeatInterval ( ) : integer
Результат	integer

getHost() публичный Метод

Get the configured host.

public getHost ( ) : string
Результат	string	The configured hostname of the broker

getKey() публичный Метод

Get path to the client key in PEM format

public getKey ( ) : string
Результат	string

getLogin() публичный Метод

Get the configured login.

public getLogin ( ) : string
Результат	string	The configured login as a string.

getMaxChannels() публичный Метод

When connection is connected, effective connection value returned, which is normally the same as original correspondent value passed to constructor, otherwise original value passed to constructor returned.

public getMaxChannels ( ) : integer
Результат	integer

getMaxFrameSize() публичный Метод

When connection is connected, effective connection value returned, which is normally the same as original correspondent value passed to constructor, otherwise original value passed to constructor returned.

public getMaxFrameSize ( ) : integer
Результат	integer

getPassword() публичный Метод

Get the configured password.

public getPassword ( ) : string
Результат	string	The configured password as a string.

getPort() публичный Метод

Get the configured port.

public getPort ( ) : integer
Результат	integer	The configured port as an integer.

getReadTimeout() публичный Метод

Get the configured interval of time to wait for income activity from AMQP broker

public getReadTimeout ( ) : float
Результат	float

getTimeout() публичный Метод

Get the configured interval of time to wait for income activity from AMQP broker

public getTimeout ( ) : float
Результат	float

getUsedChannels() публичный Метод

Return last used channel id during current connection session.

public getUsedChannels ( ) : integer
Результат	integer

getVerify() публичный Метод

Get whether peer verification enabled or disabled

public getVerify ( ) : boolean
Результат	boolean

getVhost() публичный Метод

Get the configured vhost.

public getVhost ( ) : string
Результат	string	The configured virtual host as a string.

getWriteTimeout() публичный Метод

Get the configured interval of time to wait for outcome activity to AMQP broker

public getWriteTimeout ( ) : float
Результат	float

isConnected() публичный Метод

It does so by checking the return status of the last connect-command.

public isConnected ( ) : boolean
Результат	boolean	True if connected, false otherwise.

isPersistent() публичный Метод

When connection is not connected, boolean false always returned

public isPersistent ( ) : boolean
Результат	boolean

pconnect() публичный Метод

This method will initiate a connection with the AMQP broker or reuse an existing one if present.

public pconnect ( ) : boolean
Результат	boolean	TRUE on success or throws an exception on failure.

pdisconnect() публичный Метод

This method will close an open persistent connection with the AMQP broker.

public pdisconnect ( ) : boolean
Результат	boolean	true if connection was found and closed, false if no persistent connection with this host, port, vhost and login could be found,

preconnect() публичный Метод

Close any open persistent connections and initiate a new one with the AMQP broker.

public preconnect ( ) : boolean
Результат	boolean	TRUE on success or FALSE on failure.

reconnect() публичный Метод

Close any open transient connections and initiate a new one with the AMQP broker.

public reconnect ( ) : boolean
Результат	boolean	TRUE on success or FALSE on failure.

setCACert() публичный Метод

Set path to the CA cert file in PEM format

public setCACert ( string $cacert )
$cacert	string

setCert() публичный Метод

Set path to the client certificate in PEM format

public setCert ( string $cert )
$cert	string

setHost() публичный Метод

Set the hostname used to connect to the AMQP broker.

public setHost ( string $host ) : boolean
$host	string	The hostname of the AMQP broker.
Результат	boolean	TRUE on success or FALSE on failure.

setKey() публичный Метод

Set path to the client key in PEM format

public setKey ( string $key )
$key	string

setLogin() публичный Метод

Set the login string used to connect to the AMQP broker.

public setLogin ( string $login ) : boolean
$login	string	The login string used to authenticate with the AMQP broker.
Результат	boolean	TRUE on success or FALSE on failure.

setPassword() публичный Метод

Set the password string used to connect to the AMQP broker.

public setPassword ( string $password ) : boolean
$password	string	The password string used to authenticate with the AMQP broker.
Результат	boolean	TRUE on success or FALSE on failure.

setPort() публичный Метод

Set the port used to connect to the AMQP broker.

public setPort ( integer $port ) : boolean
$port	integer	The port used to connect to the AMQP broker.
Результат	boolean	TRUE on success or FALSE on failure.

setReadTimeout() публичный Метод

Sets the interval of time to wait for income activity from AMQP broker

public setReadTimeout ( integer $timeout ) : boolean
$timeout	integer
Результат	boolean

setTimeout() публичный Метод

Sets the interval of time to wait for income activity from AMQP broker

public setTimeout ( integer $timeout ) : boolean
$timeout	integer
Результат	boolean

setVerify() публичный Метод

Enable or disable peer verification

public setVerify ( boolean $verify )
$verify	boolean

setVhost() публичный Метод

Sets the virtual host to which to connect on the AMQP broker.

public setVhost ( string $vhost ) : boolean
$vhost	string	The virtual host to use on the AMQP broker.
Результат	boolean	true on success or false on failure.

setWriteTimeout() публичный Метод

Sets the interval of time to wait for outcome activity to AMQP broker

public setWriteTimeout ( integer $timeout ) : boolean
$timeout	integer
Результат	boolean