PHP Class Horde_ActiveSync_Wbxml_Decoder, horde

Author: Michael J Rubinsky ([email protected])

Inheritance: extends Horde_ActiveSync_Wbxml

显示文件 Open project: horde/horde Class Usage Examples

Public Properties

Property	Type	Description
$charsetid
$publicid
$publicstringid
$stringtable
$version	integer	Store the wbxml version value. Used to verify we have a valid wbxml input stream.

Protected Properties

Property	Type	Description
$_attrcp
$_buffer	stream	Temporary string buffer
$_isWbxml	boolean	Flag to indicate we have a valid wbxml input stream
$_lastStartElement	array	Cache the last successfully fetched start tag array. Used to be able to easily detected emtpy nodes after the element was already fetched.
$_readHeader
$_ungetbuffer

Public Methods

Method	Description
_ungetElement ( array $element ) : void	Unget the specified element from the stream. Places the element into the unget buffer.
getElement ( ) : array \| boolean	Returns either start, content or end, and auto-concatenates successive content.
getElementContent ( ) : mixed	Get the element contents
getElementEndTag ( ) : array \| boolean	Get the next tag, which is assumed to be an end tag.
getElementStartTag ( string $tag ) : array \| boolean	Get the next tag, which is assumed to be a start tag.
getFullInputStream ( ) : resource	Return the full, raw, input stream. Used for things like SendMail request where we don't have wbxml to parse. The calling code is responsible for closing the stream.
getLastStartElement ( ) : array \| boolean	Returns the last element array fetched using getElementStartTag()
getToken ( ) : array	Get the next [start \| content \| end] tag.
isEmptyElement ( array $el ) : boolean	Returns whether or not the passed in element array represents an empty tag.
isWbxml ( ) : boolean	Check that the input stream contains wbxml. Basically looks for a valid WBXML_VERSION header. self::readWbxmlHeader MUST have been called already.
peek ( ) : array	Peek at the next element in the stream.
readWbxmlHeader ( )	Start reading the wbxml stream, pulling off the initial header and populate the properties.

Protected Methods

Method	Description
_getAttributes ( ) : mixed	Get the element attributes
_getByte ( ) : string	Fetch a single byte from the stream.
_getMBUInt ( ) : integer	Get an MBU integer
_getMapping ( integer $cp, integer $id ) : mixed	Get a dtd mapping
_getOpaque ( integer $len ) : string	Get an opaque value from the stream of the specified length.
_getStringTable ( ) : string	Fetch the string table. Don't think we use the results anywhere though.
_getStringTableEntry ( integer $id ) : string	Really don't know for sure what this method is supposed to do, it is called from numerous places in this class, but the original zpush code did not contain this method.
_getTempStream ( ) : stream	Return the temporary buffer stream.
_getTermStr ( ) : string	Get a null terminated string from the stream.
_getToken ( ) : array	Get the next start tag, content or end tag
_logToken ( $el ) : void	Log the token.
_readVersion ( )	Read the Wbxml version header byte, and buffer the input incase we need the full stream later.
_splitAttribute ( string $attr ) : array	Parses an attribute string

Method Details

_getAttributes() protected method

Get the element attributes

protected _getAttributes ( ) : mixed
return	mixed	The value of the element's attributes.

_getByte() protected method

Fetch a single byte from the stream.

protected _getByte ( ) : string
return	string	The single byte.

_getMBUInt() protected method

Get an MBU integer

protected _getMBUInt ( ) : integer
return	integer

_getMapping() protected method

Get a dtd mapping

protected _getMapping ( integer $cp, integer $id ) : mixed
$cp	integer	The codepage to use.
$id	integer	The property.
return	mixed	The mapped value.

_getOpaque() protected method

Get an opaque value from the stream of the specified length.

protected _getOpaque ( integer $len ) : string
$len	integer	The length of the data to fetch.
return	string	A string of bytes representing the opaque value.

_getStringTable() protected method

Fetch the string table. Don't think we use the results anywhere though.

protected _getStringTable ( ) : string
return	string	The string table.

_getStringTableEntry() protected method

..so, either it's completely broken, or normal use-cases do not reach the calling code. Either way, it needs to eventually be fixed.

protected _getStringTableEntry ( integer $id ) : string
$id	integer	The entry to return??
return	string

_getTempStream() protected method

Return the temporary buffer stream.

protected _getTempStream ( ) : stream
return	stream

_getTermStr() protected method

Get a null terminated string from the stream.

protected _getTermStr ( ) : string
return	string	The string

_getToken() protected method

Get the next start tag, content or end tag

protected _getToken ( ) : array
return	array	The element array.

_logToken() protected method

Log the token.

protected _logToken ( $el ) : void
return	void

_readVersion() protected method

Read the Wbxml version header byte, and buffer the input incase we need the full stream later.

protected _readVersion ( )

_splitAttribute() protected method

Parses an attribute string

protected _splitAttribute ( string $attr ) : array
$attr	string	The raw attribute value.
return	array	The attribute hash

_ungetElement() public method

Unget the specified element from the stream. Places the element into the unget buffer.

public _ungetElement ( array $element ) : void
$element	array	The element array to unget.
return	void

getElement() public method

Returns either start, content or end, and auto-concatenates successive content.

public getElement ( ) : array \| boolean
return	array \| boolean	The element structure or false on failure.

getElementContent() public method

Get the element contents

public getElementContent ( ) : mixed
return	mixed	The content of the current element \| false on failure.

getElementEndTag() public method

Get the next tag, which is assumed to be an end tag.

public getElementEndTag ( ) : array \| boolean
return	array \| boolean	The element array \| false on failure.

getElementStartTag() public method

Get the next tag, which is assumed to be a start tag.

public getElementStartTag ( string $tag ) : array \| boolean
$tag	string	The element that this should be a start tag for.
return	array \| boolean	The start tag array \| false on failure.

getFullInputStream() public method

Return the full, raw, input stream. Used for things like SendMail request where we don't have wbxml to parse. The calling code is responsible for closing the stream.

public getFullInputStream ( ) : resource
return	resource

getLastStartElement() public method

Returns the last element array fetched using getElementStartTag()

public getLastStartElement ( ) : array \| boolean
return	array \| boolean	The element array, or false if none available.

getToken() public method

Get the next [start | content | end] tag.

public getToken ( ) : array
return	array	The next, complete, token array.

isEmptyElement() public method

Returns whether or not the passed in element array represents an empty tag.

public isEmptyElement ( array $el ) : boolean
$el	array	The element array.
return	boolean	True if $el is an empty start tag, otherwise false.

isWbxml() public method

Check that the input stream contains wbxml. Basically looks for a valid WBXML_VERSION header. self::readWbxmlHeader MUST have been called already.

public isWbxml ( ) : boolean
return	boolean

peek() public method

Peek at the next element in the stream.

public peek ( ) : array
return	array	The next element in the stream.

readWbxmlHeader() public method

Start reading the wbxml stream, pulling off the initial header and populate the properties.

public readWbxmlHeader ( )

Property Details

$_attrcp protected_oe property

protected $_attrcp

$_buffer protected_oe property

Temporary string buffer

protected stream $_buffer
return	stream

$_isWbxml protected_oe property

Flag to indicate we have a valid wbxml input stream

protected bool $_isWbxml
return	boolean

$_lastStartElement protected_oe property

Cache the last successfully fetched start tag array. Used to be able to easily detected emtpy nodes after the element was already fetched.

protected array $_lastStartElement
return	array

$_readHeader protected_oe property

protected $_readHeader

$_ungetbuffer protected_oe property

protected $_ungetbuffer

$charsetid public_oe property

public $charsetid

$publicid public_oe property

public $publicid

$publicstringid public_oe property

public $publicstringid

$stringtable public_oe property

public $stringtable

$version public_oe property

Store the wbxml version value. Used to verify we have a valid wbxml input stream.

public int $version
return	integer

public getElementEndTag ( ) : array \| boolean
return	array \| boolean	The element array \| false on failure.